Subject: Re: [RFC PATCH 17/27] mtd: nand: ecc: Let the software Hamming ECC engine be unselected

From: Boris Brezillon <[email-masked]>
Date: Thu, 21 Feb 2019 14:41:48 +0100

On Thu, 21 Feb 2019 14:35:39 +0100
Miquel Raynal <[email-masked]> wrote:

> Hi Boris,
> 
> Boris Brezillon <[email-masked]> wrote on Thu, 21 Feb 2019
> 14:20:02 +0100:
> 
> > On Thu, 21 Feb 2019 13:57:56 +0100
> > Miquel Raynal <[email-masked]> wrote:
> >   
> > > There is no reason to always embed the software Hamming ECC engine
> > > implementation. By default it is, but we can let the user decide.
> > > 
> > > Signed-off-by: Miquel Raynal <[email-masked]>
> > > ---
> > >  drivers/mtd/nand/ecc/Kconfig               | 10 +++++-
> > >  drivers/mtd/nand/raw/Kconfig               |  2 +-
> > >  include/linux/mtd/nand-sw-hamming-engine.h | 38 ++++++++++++++++++++++
> > >  3 files changed, 48 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/mtd/nand/ecc/Kconfig b/drivers/mtd/nand/ecc/Kconfig
> > > index e0106b3a7ec1..ff20e621ffef 100644
> > > --- a/drivers/mtd/nand/ecc/Kconfig
> > > +++ b/drivers/mtd/nand/ecc/Kconfig
> > > @@ -1,7 +1,15 @@
> > >  menu "ECC engine support"
> > >  
> > >  config MTD_NAND_ECC_SW_HAMMING
> > > -	tristate
> > > +	tristate "Software Hamming ECC engine"
> > > +	default y    
> > 
> > Same as for the NAND_CORE stuff, let users this option when they need
> > it instead of having a "default y". Haven't made my mind yet on whether
> > this option should be visible to users or not. I guess it could be with
> > the new infrastructure, but it's probably too early in the patch series
> > to change that.  
> 
> This one is different.
> 
> Before the series: the software Hamming ECC algorithm is part of the
> 'NAND package'. There is no way to ignore it, it *will* be part of your
> binary (or module).
> 
> After the series: I just give the user the possibility to deselect
> this option. But having 'default y' is mandatory here to avoid breaking
> current defconfigs.

Okay, then maybe

	default y if MTD_RAW_NAND

And I think you should select the option in MTD_NAND_NDFC instead of
adding a depends on. 

> 
> >   
> > > +	help
> > > +	  This enables support for software Hamming error
> > > +	  correction. This correction can correct up to 1 bit error
> > > +	  per chunk and detect up to 2 bit errors. While it used to be
> > > +	  widely used with old parts, newer NAND chips usually require
> > > +	  more strength correction and in this case BCH or RS will be
> > > +	  preferred.
> > >      
> 
> 
> Thanks,
> Miquèl

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel