Subject: Re: [PATCH] ARM: dts: pfla02: increase phy reset duration

From: Shawn Guo <[email-masked]>
Date: Wed, 20 Mar 2019 16:59:38 +0800

On Mon, Mar 04, 2019 at 11:49:40AM +0100, Marco Felsch wrote:
> Increase the reset duration to ensure correct phy functionality. The
> reset duration is taken from barebox commit 52fdd510de ("ARM: dts:
> pfla02: use long enough reset for ethernet phy"):
> 
>   Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a
>   small percentage of modules have 'transmission timeouts' errors like
> 
>   barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0
>   warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3
>   eth0: 1000Mbps full duplex link detected
>   eth0: transmission timeout
>   T eth0: transmission timeout
>   T eth0: transmission timeout
>   T eth0: transmission timeout
>   T eth0: transmission timeout
> 
> Cc: Stefan Christ <[email-masked]>
> Cc: Christian Hemp <[email-masked]>
> Signed-off-by: Marco Felsch <[email-masked]>

Do you want to get this in as a fix or just -next material?  If it's a
fix, please have a Fixes tag.

Shawn

> ---
>  arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> index 673711f445b6..7e53ac6cfa8a 100644
> --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
> @@ -91,6 +91,7 @@
>  	pinctrl-0 = <&pinctrl_enet>;
>  	phy-handle = <&ethphy>;
>  	phy-mode = "rgmii";
> +	phy-reset-duration = <10>; /* in msecs */
>  	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
>  	phy-supply = <&vdd_eth_io_reg>;
>  	status = "disabled";
> -- 
> 2.20.1
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel