Subject: Re: [PATCH v2 3/3] arm64: dts: imx: Add i.mx8mm evk basic dts support

From: Shawn Guo <[email-masked]>
Date: Thu, 21 Mar 2019 16:44:54 +0800

On Tue, Mar 12, 2019 at 05:45:05AM +0000, Jacky Bai wrote:
> Add basic dts support for i.MM8MM LPDDR4 EVK.
> 
> Signed-off-by: Jacky Bai <[email-masked]>
> ---
>  change v1->v2:
>  - remove duplicated imx8mq-evk line caused by rebase conflict
> ---
>  arch/arm64/boot/dts/freescale/Makefile       |   1 +
>  arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 238 +++++++++++++++++++++++++++
>  2 files changed, 239 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 13604e5..9845543 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -20,5 +20,6 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
>  
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> new file mode 100644
> index 0000000..48a1a40
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> @@ -0,0 +1,238 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2019 NXP
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mm.dtsi"
> +
> +/ {
> +	model = "FSL i.MX8MM EVK board";
> +	compatible = "fsl,imx8mm-evk", "fsl,imx8mm";

The board compatible should be added to
Documentation/devicetree/bindings/arm/fsl.yaml as well.
> +
> +	chosen {
> +		bootargs = "console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200";

Is it really necessary to have a bootargs in DT?

> +		stdout-path = &uart2;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_led>;
> +
> +		status {
> +			label = "status";
> +			gpios = <&gpio3 16 0>;

Use GPIO_ACTIVE_HIGH.

> +			default-state = "on";
> +		};
> +	};
> +
> +	reg_usdhc2_vmmc: regulator-usdhc2 {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
> +		regulator-name = "VSD_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> +		off-on-delay = <20000>;

Unsupported property?

Shawn

> +		enable-active-high;
> +	};
> +};
> +
> +&fec1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec1>;
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&ethphy0>;
> +	fsl,magic-packet;
> +	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy0: ethernet-phy@0 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
> +			reg = <0>;
> +			at803x,led-act-blind-workaround;
> +			at803x,eee-okay;
> +			at803x,vddio-1p8v;
> +		};
> +	};
> +};
> +
> +&uart2 { /* console */
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	status = "okay";
> +};
> +
> +&usdhc2 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> +	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> +	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> +	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
> +	bus-width = <4>;
> +	vmmc-supply = <&reg_usdhc2_vmmc>;
> +	status = "okay";
> +};
> +
> +&usdhc3 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> +	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> +	bus-width = <8>;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&wdog1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_wdog>;
> +	fsl,ext-reset-output;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +
> +	pinctrl_fec1: fec1grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
> +			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
> +			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
> +			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
> +			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
> +			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
> +			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
> +			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
> +			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
> +			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
> +			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
> +			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
> +			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
> +			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
> +			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22		0x19
> +		>;
> +	};
> +
> +	pinctrl_gpio_led: gpioledgrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x19
> +		>;
> +	};
> +
> +	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
> +		>;
> +	};
> +
> +	pinctrl_uart2: uart2grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
> +			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_gpio: usdhc2grpgpio {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
> +		>;
> +	};
> +
> +	pinctrl_usdhc2: usdhc2grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
> +			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
> +			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
> +			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
> +			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
> +			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
> +			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
> +			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
> +			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
> +			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
> +			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
> +			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
> +			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
> +			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
> +			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
> +			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
> +			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
> +			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
> +			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
> +		>;
> +	};
> +
> +	pinctrl_usdhc3: usdhc3grp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
> +			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
> +			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
> +			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
> +			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
> +			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
> +			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
> +			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
> +			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
> +			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
> +			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 		0x190
> +		>;
> +	};
> +
> +	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
> +			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
> +			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
> +			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
> +			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
> +			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
> +			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
> +			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
> +			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
> +			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
> +			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 		0x194
> +		>;
> +	};
> +
> +	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
> +			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
> +			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
> +			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
> +			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
> +			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
> +			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
> +			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
> +			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
> +			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
> +			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 		0x196
> +		>;
> +	};
> +
> +	pinctrl_wdog: wdoggrp {
> +		fsl,pins = <
> +			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
> +		>;
> +	};
> +};
> +
> -- 
> 1.9.1
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel