Subject: Re: [RFC V2 08/11] dt-bindings: interconnect: add MT8183 interconnect dt-bindings

From: Rob Herring <[email-masked]>
Date: Wed, 1 May 2019 15:27:53 -0500

On Tue, Apr 30, 2019 at 04:51:02PM +0800, Henry Chen wrote:
> Add interconnect provider dt-bindings for MT8183.
> 
> Signed-off-by: Henry Chen <[email-masked]>
> ---
>  .../bindings/interconnect/mtk,mt8183.txt           | 24 ++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt
> 
> diff --git a/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt b/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt
> new file mode 100644
> index 0000000..1cf1841
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt
> @@ -0,0 +1,24 @@
> +Mediatek MT8183 interconnect binding

This should be part of the dvfsrc binding.

> +
> +MT8183 interconnect providers support dram bandwidth requirements. The provider
> +is able to communicate with the DVFSRC and send the dram bandwidth to it.
> +Provider nodes must reside within an DVFSRC device node.
> +
> +Required properties :
> +- compatible : shall contain only one of the following:
> +			"mediatek,mt8183-emi-icc"
> +- #interconnect-cells : should contain 1
> +
> +Examples:
> +
> +dvfsrc@10012000 {
> +	compatible = "mediatek,mt8183-dvfsrc";
> +	reg = <0 0x10012000 0 0x1000>;
> +	clocks = <&infracfg CLK_INFRA_DVFSRC>;
> +	clock-names = "dvfsrc";
> +	ddr_emi: interconnect {
> +		compatible = "mediatek,mt8183-emi-icc";
> +		#interconnect-cells = <1>;

No need for a child node here. Just move #interconnect-cells to the 
parent.

Rob

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel