From: Raphael Gault <raphael.gault@arm•com>
To: linux-arm-kernel@lists•infradead.org, linux-kernel@vger•kernel.org
Cc: julien.thierry@arm•com, peterz@infradead•org,
catalin.marinas@arm•com, will.deacon@arm•com,
Raphael Gault <raphael.gault@arm•com>,
jpoimboe@redhat•com
Subject: [RFC 01/16] objtool: Add abstraction for computation of symbols offsets
Date: Thu, 16 May 2019 11:36:40 +0100 [thread overview]
Message-ID: <20190516103655.5509-2-raphael.gault@arm.com> (raw)
In-Reply-To: <20190516103655.5509-1-raphael.gault@arm.com>
The jump destination and relocation offset used previously are only
reliable on x86_64 architecture. We abstract these computations by calling
arch-dependent implementations.
Signed-off-by: Raphael Gault <raphael.gault@arm•com>
---
tools/objtool/arch.h | 6 ++++++
tools/objtool/arch/x86/decode.c | 11 +++++++++++
tools/objtool/check.c | 15 ++++++++++-----
3 files changed, 27 insertions(+), 5 deletions(-)
diff --git a/tools/objtool/arch.h b/tools/objtool/arch.h
index 7a111a77b7aa..9897f9f94b29 100644
--- a/tools/objtool/arch.h
+++ b/tools/objtool/arch.h
@@ -76,6 +76,8 @@ struct stack_op {
struct op_src src;
};
+struct instruction;
+
void arch_initial_func_cfi_state(struct cfi_state *state);
int arch_decode_instruction(struct elf *elf, struct section *sec,
@@ -85,4 +87,8 @@ int arch_decode_instruction(struct elf *elf, struct section *sec,
bool arch_callee_saved_reg(unsigned char reg);
+unsigned long arch_jump_destination(struct instruction *insn);
+
+unsigned long arch_dest_rela_offset(int addend);
+
#endif /* _ARCH_H */
diff --git a/tools/objtool/arch/x86/decode.c b/tools/objtool/arch/x86/decode.c
index 472e991f6512..c1b95ea447c0 100644
--- a/tools/objtool/arch/x86/decode.c
+++ b/tools/objtool/arch/x86/decode.c
@@ -23,6 +23,7 @@
#include "lib/inat.c"
#include "lib/insn.c"
+#include "../../check.h"
#include "../../elf.h"
#include "../../arch.h"
#include "../../warn.h"
@@ -78,6 +79,11 @@ bool arch_callee_saved_reg(unsigned char reg)
}
}
+unsigned long arch_dest_rela_offset(int addend)
+{
+ return addend + 4;
+}
+
int arch_decode_instruction(struct elf *elf, struct section *sec,
unsigned long offset, unsigned int maxlen,
unsigned int *len, unsigned char *type,
@@ -509,3 +515,8 @@ void arch_initial_func_cfi_state(struct cfi_state *state)
state->regs[16].base = CFI_CFA;
state->regs[16].offset = -8;
}
+
+unsigned long arch_jump_destination(struct instruction *insn)
+{
+ return insn->offset + insn->len + insn->immediate;
+}
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 38b0517dc49e..2a803ab4d5b7 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -574,7 +574,7 @@ static int add_jump_destinations(struct objtool_file *file)
insn->len);
if (!rela) {
dest_sec = insn->sec;
- dest_off = insn->offset + insn->len + insn->immediate;
+ dest_off = arch_jump_destination(insn);
} else if (rela->sym->type == STT_SECTION) {
dest_sec = rela->sym->sec;
dest_off = rela->addend + 4;
@@ -668,7 +668,7 @@ static int add_call_destinations(struct objtool_file *file)
rela = find_rela_by_dest_range(insn->sec, insn->offset,
insn->len);
if (!rela) {
- dest_off = insn->offset + insn->len + insn->immediate;
+ dest_off = arch_jump_destination(insn);
insn->call_dest = find_symbol_by_offset(insn->sec,
dest_off);
@@ -681,14 +681,19 @@ static int add_call_destinations(struct objtool_file *file)
}
} else if (rela->sym->type == STT_SECTION) {
+ /*
+ * the original x86_64 code adds 4 to the rela->addend
+ * which is not needed on arm64 architecture.
+ */
+ dest_off = arch_dest_rela_offset(rela->addend);
insn->call_dest = find_symbol_by_offset(rela->sym->sec,
- rela->addend+4);
+ dest_off);
if (!insn->call_dest ||
insn->call_dest->type != STT_FUNC) {
- WARN_FUNC("can't find call dest symbol at %s+0x%x",
+ WARN_FUNC("can't find call dest symbol at %s+0x%lx",
insn->sec, insn->offset,
rela->sym->sec->name,
- rela->addend + 4);
+ dest_off);
return -1;
}
} else
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-05-16 10:38 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-16 10:36 [RFC V2 00/16] objtool: Add support for Arm64 Raphael Gault
2019-05-16 10:36 ` Raphael Gault [this message]
2019-05-16 10:36 ` [RFC 02/16] objtool: orc: Refactor ORC API for other architectures to implement Raphael Gault
2019-05-16 10:36 ` [RFC 03/16] objtool: Move registers and control flow to arch-dependent code Raphael Gault
2019-05-16 10:36 ` [RFC 04/16] objtool: arm64: Add required implementation for supporting the aarch64 architecture in objtool Raphael Gault
2019-05-16 10:36 ` [RFC 05/16] objtool: arm64: Handle hypercalls as nops Raphael Gault
2019-05-16 10:36 ` [RFC 06/16] arm64: alternative: Mark .altinstr_replacement as containing executable instructions Raphael Gault
2019-05-16 10:36 ` [RFC 07/16] objtool: special: Adapt special section handling Raphael Gault
2019-05-16 10:36 ` [RFC 08/16] objtool: arm64: Adapt the stack frame checks for arm architecture Raphael Gault
2019-05-16 10:36 ` [RFC 09/16] arm64: assembler: Add macro to annotate asm function having non standard stack-frame Raphael Gault
2019-05-16 10:36 ` [RFC 10/16] arm64: sleep: Prevent stack frame warnings from objtool Raphael Gault
2019-05-16 10:36 ` [RFC 11/16] objtool: arm64: Enable stack validation for arm64 Raphael Gault
2019-05-16 10:36 ` [RFC 12/16] arm64: kvm: Annotate non-standard stack frame functions Raphael Gault
2019-05-16 10:36 ` [RFC 13/16] arm64: kernel: Add exception on kuser32 to prevent stack analysis Raphael Gault
2019-05-16 10:36 ` [RFC 14/16] arm64: crypto: Add exceptions for crypto object " Raphael Gault
2019-05-16 10:36 ` [RFC 15/16] objtool: Introduce INSN_UNKNOWN type Raphael Gault
2019-05-16 10:36 ` [RFC 16/16] arm64: kernel: Annotate non-standard stack frame functions Raphael Gault
2019-05-16 14:29 ` [RFC V2 00/16] objtool: Add support for Arm64 Josh Poimboeuf
2019-05-21 12:50 ` Raphael Gault
2019-05-22 23:11 ` Josh Poimboeuf
2019-05-23 7:31 ` Raphael Gault
2019-05-23 7:59 ` Raphael Gault
2019-05-28 22:24 ` Josh Poimboeuf
2019-06-13 15:55 ` Raphael Gault
2019-06-13 16:09 ` Josh Poimboeuf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190516103655.5509-2-raphael.gault@arm.com \
--to=raphael.gault@arm$(echo .)com \
--cc=catalin.marinas@arm$(echo .)com \
--cc=jpoimboe@redhat$(echo .)com \
--cc=julien.thierry@arm$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
--cc=linux-kernel@vger$(echo .)kernel.org \
--cc=peterz@infradead$(echo .)org \
--cc=will.deacon@arm$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox