Subject: [PATCH v2 1/3] arm64: dts: imx8mm: Pass a unit name for the 'soc' node

From: Fabio Estevam <[email-masked]>
Date: Tue, 28 May 2019 16:00:21 -0300

The 'soc' name needs a unit name to match its 'ranges' property.

Pass the unit name in order to fix the following dtc build warning
with W=1:

arch/arm64/boot/dts/freescale/imx8mm.dtsi:203.6-754.4: Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name

This also aligns with imx8mq.dtsi.

Signed-off-by: Fabio Estevam <[email-masked]>
---
Changes since v1:
- Fixed typo in "aligns with imx8mq.dtsi"

 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 708d3c4c1389..d6803db32e40 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -200,7 +200,7 @@
 		arm,no-tick-in-suspend;
 	};
 
-	soc {
+	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-- 
2.17.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel