Subject: Re: [PATCH 4.19 080/118] ARM: dts: imx51: Specify IMX5_CLK_IPG as "ahb" clock to SDMA

From: Pavel Machek <[email-masked]>
Date: Sat, 15 Jun 2019 22:05:03 +0200

Hi!

> [ Upstream commit 918bbde8085ae147a43dcb491953e0dd8f3e9d6a ]
> 
> Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
> clock to determine if it needs to configure the IP block as operating
> at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
> clocks as IMX5_CLK_SDMA results in driver incorrectly thinking that
> ratio is 1:1 which results in broken SDMA funtionality. Fix the code
> to specify IMX5_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
> incorrect clock ratio.

I don't see 25aaa75df1e6 commit in stable-4.19.y branch. Is that intentional?

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel