Subject: Re: [PATCH v4] arm64: dts: imx8mq: Init rates and parents configs for clocks

From: Guido Günther <[email-masked]>
Date: Mon, 29 Jul 2019 14:48:45 +0200

Hi,
On Sun, Jul 28, 2019 at 06:20:40PM +0300, Daniel Baluta wrote:
> From: Abel Vesa <[email-masked]>
> 
> Add the initial configuration for clocks that need default parent and rate
> setting. This is based on the vendor tree clock provider parents and rates
> configuration except this is doing the setup in dts rather then using clock
> consumer API in a clock provider driver.
> 
> Note that by adding the initial rate setting for audio_pll1/audio_pll
> setting we need to remove it from imx8mq-librem5-devkit.dts
> 
> Signed-off-by: Abel Vesa <[email-masked]>
> Signed-off-by: Daniel Baluta <[email-masked]>
> Tested-by: Angus Ainslie (Purism) <[email-masked]>
> ---
> Changes since v3:
> 	- fix extra new lines
> 
>  .../dts/freescale/imx8mq-librem5-devkit.dts   |  5 -----
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 19 +++++++++++++++++++
>  2 files changed, 19 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> index 683a11035643..c702ccc82867 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> @@ -169,11 +169,6 @@
>  	};
>  };
>  
> -&clk {
> -	assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
> -	assigned-clock-rates = <786432000>, <722534400>;
> -};
> -
>  &dphy {
>  	status = "okay";
>  };
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 02fbd0625318..a55d72ba2e05 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -494,6 +494,25 @@
>  				clock-names = "ckil", "osc_25m", "osc_27m",
>  				              "clk_ext1", "clk_ext2",
>  				              "clk_ext3", "clk_ext4";
> +				assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1>,
> +					<&clk IMX8MQ_AUDIO_PLL1>,
> +					<&clk IMX8MQ_AUDIO_PLL2>,
> +					<&clk IMX8MQ_CLK_AHB>,
> +					<&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
> +					<&clk IMX8MQ_CLK_AUDIO_AHB>,
> +					<&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
> +					<&clk IMX8MQ_CLK_NOC>;
> +				assigned-clock-parents = <0>,
> +						<0>,
> +						<0>,
> +						<&clk IMX8MQ_SYS1_PLL_133M>,
> +						<&clk IMX8MQ_SYS1_PLL_266M>,
> +						<&clk IMX8MQ_SYS2_PLL_500M>,
> +						<&clk IMX8MQ_CLK_27M>,
> +						<&clk IMX8MQ_SYS1_PLL_800M>;
> +				assigned-clock-rates = <593999999>,
> +						<786432000>,
> +						<722534400>;
>  			};
>  
>  			src: reset-controller@30390000 {

Tested-by: Guido Günther <[email-masked]> 

Cheers,
 -- Guido

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel