Subject: [PATCH v3 17/19] arm64: dts: marvell: Add 7k/8k PHYs in USB3 nodes

From: Miquel Raynal <[email-masked]>
Date: Wed, 31 Jul 2019 14:21:24 +0200

Fill-in the missing USB3 phys/phy-names DT properties of Armada 7k/8k
based boards. Only update nodes actually enabling USB3 in the default
(mainline) configuration. A few USB nodes are enabled but there is
only USB2 working on them.

Signed-off-by: Miquel Raynal <[email-masked]>
---
 arch/arm64/boot/dts/marvell/armada-7040-db.dts             | 4 ++++
 arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 2 ++
 arch/arm64/boot/dts/marvell/armada-8040-db.dts             | 2 ++
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi         | 2 ++
 4 files changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index 45eb4197e603..81bea91468f7 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -228,11 +228,15 @@
 
 &cp0_usb3_0 {
 	usb-phy = <&cp0_usb3_0_phy>;
+	phys = <&cp0_comphy1 0>;
+	phy-names = "cp0-usb3h0-comphy";
 	status = "okay";
 };
 
 &cp0_usb3_1 {
 	usb-phy = <&cp0_usb3_1_phy>;
+	phys = <&cp0_comphy4 1>;
+	phy-names = "cp0-usb3h1-comphy";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 1527c82177ab..281209aa7f2c 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -474,5 +474,7 @@
 
 &cp1_usb3_0 {
 	usb-phy = <&usb3h0_phy>;
+	phys = <&cp1_comphy2 0>;
+	phy-names = "cp1-usb3h0-comphy";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 66afed6c6245..1086d53fd1b9 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -163,6 +163,8 @@
 /* CON10 on CP0 expansion */
 &cp0_usb3_1 {
 	usb-phy = <&cp0_usb3_1_phy>;
+	phys = <&cp0_comphy4 1>;
+	phy-names = "cp0-usb3h1-comphy";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index b8f28d62be5c..6b9941d92e20 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -359,5 +359,7 @@
 &cp1_usb3_0 {
 	/* CPS Lane 2 - CON7 */
 	usb-phy = <&usb3h0_phy>;
+	phys = <&cp1_comphy2 0>;
+	phy-names = "cp1-usb3h0-comphy";
 	status = "okay";
 };
-- 
2.20.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel