Subject: Re: [PATCH v8 09/14] media: rkisp1: add rockchip isp1 core driver

From: Sakari Ailus <[email-masked]>
Date: Wed, 7 Aug 2019 18:36:46 +0300

Hi Helen,

On Tue, Jul 30, 2019 at 03:42:51PM -0300, Helen Koike wrote:

...

> +static int rkisp1_fwnode_parse(struct device *dev,
> +			       struct v4l2_fwnode_endpoint *vep,
> +			       struct v4l2_async_subdev *asd)
> +{
> +	struct sensor_async_subdev *s_asd =
> +			container_of(asd, struct sensor_async_subdev, asd);
> +
> +	if (vep->bus_type != V4L2_MBUS_CSI2_DPHY) {
> +		dev_err(dev, "Only CSI2 bus type is currently supported\n");
> +		return -EINVAL;
> +	}
> +
> +	if (vep->base.port != 0) {
> +		dev_err(dev, "The ISP has only port 0\n");
> +		return -EINVAL;
> +	}
> +
> +	s_asd->mbus.type = vep->bus_type;
> +	s_asd->mbus.flags = vep->bus.mipi_csi2.flags;
> +	s_asd->lanes = vep->bus.mipi_csi2.num_data_lanes;
> +
> +	switch (vep->bus.mipi_csi2.num_data_lanes) {
> +	case 1:
> +		s_asd->mbus.flags |= V4L2_MBUS_CSI2_1_LANE;
> +		break;
> +	case 2:
> +		s_asd->mbus.flags |= V4L2_MBUS_CSI2_2_LANE;
> +		break;
> +	case 3:
> +		s_asd->mbus.flags |= V4L2_MBUS_CSI2_3_LANE;
> +		break;
> +	case 4:
> +		s_asd->mbus.flags |= V4L2_MBUS_CSI2_4_LANE;
> +		break;

Could you use struct v4l2_fwnode_endpoint directly? The mbus config is a
legacy struct from bygone times and I'd like to avoid using it in new
drivers.

> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_async_notifier_operations subdev_notifier_ops = {
> +	.bound = subdev_notifier_bound,
> +	.unbind = subdev_notifier_unbind,
> +	.complete = subdev_notifier_complete,
> +};
> +
> +static int isp_subdev_notifier(struct rkisp1_device *isp_dev)
> +{
> +	struct v4l2_async_notifier *ntf = &isp_dev->notifier;
> +	struct device *dev = isp_dev->dev;
> +	int ret;
> +
> +	v4l2_async_notifier_init(ntf);
> +
> +	ret = v4l2_async_notifier_parse_fwnode_endpoints_by_port(
> +		dev, ntf, sizeof(struct sensor_async_subdev), 0,
> +		rkisp1_fwnode_parse);

I know these functions aren't old but there's a better alternative. See
e.g. isp_parse_of_endpoints in drivers/media/platform/omap3isp/isp.c or
cio2_parse_firmware in drivers/media/pci/intel/ipu3/ipu3-cio2.c.

> +	if (ret < 0)
> +		return ret;
> +
> +	if (list_empty(&ntf->asd_list))
> +		return -ENODEV;	/* no endpoint */
> +
> +	ntf->ops = &subdev_notifier_ops;
> +
> +	return v4l2_async_notifier_register(&isp_dev->v4l2_dev, ntf);
> +}

-- 
Sakari Ailus
[email-masked]

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel