Subject: Re: [PATCH 1/5] media: dt-bindings: Add JPEG ENC device tree node document

From: Rob Herring <[email-masked]>
Date: Mon, 12 Aug 2019 16:59:52 -0600

On Wed, Jul 17, 2019 at 05:30:30PM +0800, Xia Jiang wrote:
> add JPEG ENC device tree node document
> 
> Change-Id: I9f0a8aec7eced20c88acbc88d6ff179763f91246

Run checkpatch.pl. (Remove this)

> Signed-off-by: Xia Jiang <[email-masked]>
> ---
>  .../bindings/media/mediatek-jpeg-encoder.txt  | 33 +++++++++++++++++++
>  1 file changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
> new file mode 100644
> index 000000000000..1231fedb70bc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
> @@ -0,0 +1,33 @@
> +* MediaTek JPEG Encoder
> +
> +MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
> +
> +Required properties:
> +- compatible : must be "mediatek,mtk-jpgenc"

Needs an SoC specific compatible.

> +- reg : physical base address of the JPEG encoder registers and length of
> +  memory mapped region.
> +- interrupts : interrupt number to the interrupt controller.
> +- clocks: device clocks, see
> +  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- clock-names: must contain "jpgenc". It is the clock of JPEG encoder.
> +- power-domains: a phandle to the power domain, see
> +  Documentation/devicetree/bindings/power/power_domain.txt for details.
> +- mediatek,larb: must contain the local arbiters in the current SoCs, see
> +  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> +  for details.
> +- iommus: should point to the respective IOMMU block with master port as
> +  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> +  for details.
> +
> +Example:
> +	jpegenc: jpegenc@1500a000 {
> +		compatible = "mediatek,mtk-jpgenc";
> +		reg = <0 0x1500a000 0 0x1000>;
> +		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
> +		clocks =  <&imgsys CLK_IMG_VENC>;
> +		clock-names = "jpgenc";
> +		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> +		mediatek,larb = <&larb2>;
> +		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
> +			<&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
> +	};
> -- 
> 2.18.0
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel