From: Andrey Smirnov <andrew.smirnov@gmail•com>
To: linux-arm-kernel@lists•infradead.org
Cc: Cory Tusar <cory.tusar@zii•aero>,
Andrey Smirnov <andrew.smirnov@gmail•com>,
Shawn Guo <shawnguo@kernel•org>,
linux-kernel@vger•kernel.org, Fabio Estevam <festevam@gmail•com>,
Chris Healy <cphealy@gmail•com>
Subject: [PATCH] ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes
Date: Fri, 23 Aug 2019 17:27:47 -0700 [thread overview]
Message-ID: <20190824002747.14610-1-andrew.smirnov@gmail.com> (raw)
The devicetree specification recommends using generic node names.
Some ZII dts files already follow such recommendation, but some don't,
so use generic node names for consistency among the ZII dts files.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail•com>
Cc: Shawn Guo <shawnguo@kernel•org>
Cc: Chris Healy <cphealy@gmail•com>
Cc: Cory Tusar <cory.tusar@zii•aero>
Cc: Fabio Estevam <festevam@gmail•com>
Cc: linux-arm-kernel@lists•infradead.org
Cc: linux-kernel@vger•kernel.org
---
arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index 45a978defbdc..6edd682dbd29 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -417,7 +417,7 @@
pinctrl-0 = <&pinctrl_dspi1>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
@@ -430,7 +430,7 @@
};
};
- spi-flash@1 {
+ flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
@@ -519,7 +519,7 @@
#gpio-cells = <2>;
};
- lm75@48 {
+ temp-sensor@48 {
compatible = "national,lm75";
reg = <0x48>;
};
@@ -534,7 +534,7 @@
reg = <0x52>;
};
- ds1682@6b {
+ elapsed-time-recorder@6b {
compatible = "dallas,ds1682";
reg = <0x6b>;
};
@@ -551,7 +551,7 @@
reg = <0x38>;
};
- adt7411@4a {
+ adc@4a {
compatible = "adi,adt7411";
reg = <0x4a>;
};
@@ -563,7 +563,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- gpio9: sx1503q@20 {
+ gpio9: io-expander@20 {
compatible = "semtech,sx1503q";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sx1503_20>;
@@ -574,12 +574,12 @@
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
};
- lm75@4e {
+ temp-sensor@4e {
compatible = "national,lm75";
reg = <0x4e>;
};
- lm75@4f {
+ temp-sensor@4f {
compatible = "national,lm75";
reg = <0x4f>;
};
@@ -591,17 +591,17 @@
reg = <0x23>;
};
- adt7411@4a {
+ adc@4a {
compatible = "adi,adt7411";
reg = <0x4a>;
};
- at24c08@54 {
+ eeprom@54 {
compatible = "atmel,24c08";
reg = <0x54>;
};
- tca9548@70 {
+ i2c-mux@70 {
compatible = "nxp,pca9548";
pinctrl-names = "default";
#address-cells = <1>;
@@ -639,7 +639,7 @@
};
};
- tca9548@71 {
+ i2c-mux@71 {
compatible = "nxp,pca9548";
pinctrl-names = "default";
reg = <0x71>;
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-08-24 0:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-24 0:27 Andrey Smirnov [this message]
2019-08-25 7:18 ` [PATCH] ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190824002747.14610-1-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail$(echo .)com \
--cc=cory.tusar@zii$(echo .)aero \
--cc=cphealy@gmail$(echo .)com \
--cc=festevam@gmail$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
--cc=linux-kernel@vger$(echo .)kernel.org \
--cc=shawnguo@kernel$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox