Subject: [GIT PULL 1/7] i.MX drivers update for 5.4

From: Shawn Guo <[email-masked]>
Date: Sun, 25 Aug 2019 17:32:31 +0200

The following changes since commit 5f9e832c137075045d15cd6899ab0505cfb2ca4b:

  Linus 5.3-rc1 (2019-07-21 14:05:38 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-drivers-5.4

for you to fetch changes up to 968c6f4b3c21e9fae9b49cc91214a01b4827625d:

  soc: imx: gpcv2: Print the correct error code (2019-08-24 22:41:08 +0200)

----------------------------------------------------------------
i.MX drivers update for 5.4:
 - A series from Anson Huang to add UID support for i.MX8 SoC and SCU
   drivers.
 - A series from Daniel Baluta to add DSP IPC driver for communication
   between host AP (Linux) and the firmware running on DSP embedded in
   i.MX8 SoCs.
 - A small fix for GPCv2 error code printing.
 - Switch from module_platform_driver_probe() to module_platform_driver()
   for imx-weim driver, as we need the driver to probe again when device
   is present later.
 - Add optional burst clock mode support for imx-weim driver.

----------------------------------------------------------------
Anson Huang (3):
      soc: imx8: Add i.MX8MQ UID(unique identifier) support
      soc: imx8: Add i.MX8MM UID(unique identifier) support
      soc: imx-scu: Add SoC UID(unique identifier) support

Daniel Baluta (4):
      firmware: imx: scu-pd: Rename mu PD range to mu_a
      firmware: imx: scu-pd: Add mu13 b side PD range
      firmware: imx: scu-pd: Add IRQSTR_DSP PD range
      firmware: imx: Add DSP IPC protocol interface

Guido Günther (1):
      soc: imx: gpcv2: Print the correct error code

Sascha Hauer (1):
      bus: imx-weim: use module_platform_driver()

Sven Van Asbroeck (1):
      bus: imx-weim: optionally enable burst clock mode

 drivers/bus/imx-weim.c           |  24 +++++-
 drivers/firmware/imx/Kconfig     |  11 +++
 drivers/firmware/imx/Makefile    |   1 +
 drivers/firmware/imx/imx-dsp.c   | 155 +++++++++++++++++++++++++++++++++++++++
 drivers/firmware/imx/scu-pd.c    |   4 +-
 drivers/soc/imx/gpcv2.c          |   2 +-
 drivers/soc/imx/soc-imx-scu.c    |  39 ++++++++++
 drivers/soc/imx/soc-imx8.c       |  45 ++++++++++++
 include/linux/firmware/imx/dsp.h |  67 +++++++++++++++++
 9 files changed, 342 insertions(+), 6 deletions(-)
 create mode 100644 drivers/firmware/imx/imx-dsp.c
 create mode 100644 include/linux/firmware/imx/dsp.h

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel