Subject: [PATCH 05/12] ARM: dts: imx7d: cl-som-imx7: update pfuze3000 max voltage

From: André Draszik <[email-masked]>
Date: Mon, 26 Aug 2019 16:37:53 +0100

The max voltage of SW1A is 3.3V on PF3000 as per
http://cache.freescale.com/files/analog/doc/data_sheet/PF3000.pdf?fsrch=1&sr=1&pageNum=1

While at it, remove the unnecessary leading zero from
the i2c address.

Signed-off-by: André Draszik <[email-masked]>
Cc: Ilya Ledvich <[email-masked]>
Cc: Igor Grinberg <[email-masked]>
Cc: Rob Herring <[email-masked]>
Cc: Mark Rutland <[email-masked]>
Cc: Shawn Guo <[email-masked]>
Cc: Sascha Hauer <[email-masked]>
Cc: Pengutronix Kernel Team <[email-masked]>
Cc: Fabio Estevam <[email-masked]>
Cc: NXP Linux Team <[email-masked]>
Cc: [email-masked]
Cc: [email-masked]
---
 arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index 481bd3971c55..78046633d91b 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -81,12 +81,12 @@
 
 	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
-		reg = <0x08>;
+		reg = <0x8>;
 
 		regulators {
 			sw1a_reg: sw1a {
 				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1475000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <6250>;
-- 
2.23.0.rc1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel