Subject: [PATCH 07/20] clocksource/drivers/imx-sysctr: Add internal clock divider handle

From: Daniel Lezcano <[email-masked]>
Date: Mon, 26 Aug 2019 22:43:54 +0200

From: Anson Huang <[email-masked]>

The system counter block guide states that the base clock is
internally divided by 3 before use, that means the clock input of
system counter defined in DT should be base clock which is normally
from OSC, and then internally divided by 3 before use.

Signed-off-by: Anson Huang <[email-masked]>
Signed-off-by: Daniel Lezcano <[email-masked]>
---
 drivers/clocksource/timer-imx-sysctr.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/clocksource/timer-imx-sysctr.c b/drivers/clocksource/timer-imx-sysctr.c
index fd7d68066efb..b7c80a368a1b 100644
--- a/drivers/clocksource/timer-imx-sysctr.c
+++ b/drivers/clocksource/timer-imx-sysctr.c
@@ -20,6 +20,8 @@
 #define SYS_CTR_EN		0x1
 #define SYS_CTR_IRQ_MASK	0x2
 
+#define SYS_CTR_CLK_DIV		0x3
+
 static void __iomem *sys_ctr_base;
 static u32 cmpcr;
 
@@ -134,6 +136,9 @@ static int __init sysctr_timer_init(struct device_node *np)
 	if (ret)
 		return ret;
 
+	/* system counter clock is divided by 3 internally */
+	to_sysctr.of_clk.rate /= SYS_CTR_CLK_DIV;
+
 	sys_ctr_base = timer_of_base(&to_sysctr);
 	cmpcr = readl(sys_ctr_base + CMPCR);
 	cmpcr &= ~SYS_CTR_EN;
-- 
2.17.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel