Subject: Re: [PATCH v2 4/4] dt-bindings/watchdog: Add access_cs0 option for alt-boot

From: Rob Herring <[email-masked]>
Date: Thu, 29 Aug 2019 17:56:02 -0500

On Mon, Aug 26, 2019 at 01:46:36PM +0300, Ivan Mikhaylov wrote:
> The option for the ast2400/2500 to get access to CS0 at runtime.
> 
> Signed-off-by: Ivan Mikhaylov <[email-masked]>
> ---
>  Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
> index c5077a1f5cb3..023a9b578df6 100644
> --- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
> @@ -34,6 +34,13 @@ Optional properties:
>                  engine is responsible for this.
>  
>   - aspeed,alt-boot:    If property is present then boot from alternate block.
> +                       At alternate side 'access_cs0' sysfs file provides:

What's sysfs?

Don't put Linux stuff in bindings.

> +                       ast2400: a way to get access to the primary SPI flash
> +                                chip at CS0 after booting from the alternate
> +                                chip at CS1.
> +                       ast2500: a way to restore the normal address mapping from
> +                                (CS0->CS1, CS1->CS0) to (CS0->CS0, CS1->CS1).
> +
>   - aspeed,external-signal: If property is present then signal is sent to
>  			external reset counter (only WDT1 and WDT2). If not
>  			specified no external signal is sent.
> -- 
> 2.20.1
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel