Subject: Re: [V2, 2/2] media: i2c: Add DW9768 VCM driver

From: Andy Shevchenko <[email-masked]>
Date: Thu, 5 Sep 2019 13:26:33 +0300

On Thu, Sep 05, 2019 at 03:21:42PM +0800, [email-masked] wrote:
> From: Dongchun Zhu <[email-masked]>
> 
> This patch adds a V4L2 sub-device driver for DW9768 lens voice coil,
> and provides control to set the desired focus.
> 
> The DW9768 is a 10 bit DAC with 100mA output current sink capability
> from Dongwoon, designed for linear control of voice coil motor,
> and controlled via I2C serial interface.

> Signed-off-by: Dongchun Zhu <[email-masked]>
> ---
>  MAINTAINERS                |   1 +

This should go to the same patch, where you introduce a record in the
MAINTAINERS database.

> +#define DW9768_SET_POSITION_ADDR                0x03

Indentation issue.

> +static struct regval_list dw9768_init_regs[] = {
> +	{0x02, 0x02},
> +	{DW9768_CMD_DELAY, DW9768_CMD_DELAY},
> +	{0x06, 0x41},
> +	{0x07, 0x39},
> +	{DW9768_CMD_DELAY, DW9768_CMD_DELAY},
> +};
> +
> +static struct regval_list dw9768_release_regs[] = {
> +	{0x02, 0x00},
> +	{DW9768_CMD_DELAY, DW9768_CMD_DELAY},
> +	{0x01, 0x00},
> +	{DW9768_CMD_DELAY, DW9768_CMD_DELAY},
> +};
> +
> +static int dw9768_write_smbus(struct dw9768 *dw9768, unsigned char reg,
> +			      unsigned char value)
> +{
> +	struct i2c_client *client = v4l2_get_subdevdata(&dw9768->sd);
> +	int ret;
> +

> +	if (reg == DW9768_CMD_DELAY  && value == DW9768_CMD_DELAY)

Indentation issue.
But see other's comments.

> +		usleep_range(DW9768_CTRL_DELAY_US,
> +			     DW9768_CTRL_DELAY_US + 100);

> +	else

This needs an explanation.

> +		ret = i2c_smbus_write_byte_data(client, reg, value);
> +	return ret;
> +}

I'm wondering if we can benefit from regmap I²C API in this driver.

> +static int __maybe_unused dw9768_vcm_suspend(struct device *dev)
> +{

> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);

isn't is simple dev_get_drvdata() ?

> +	struct dw9768 *dw9768 = sd_to_dw9768_vcm(sd);
> +
> +	return dw9768_power_off(dw9768);
> +}
> +
> +static int __maybe_unused dw9768_vcm_resume(struct device *dev)
> +{

> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);

Ditto.

> +	struct dw9768 *dw9768 = sd_to_dw9768_vcm(sd);
> +
> +	return dw9768_power_on(dw9768);
> +}

> +static const struct i2c_device_id dw9768_id_table[] = {
> +	{ DW9768_NAME, 0 },

> +	{ },

No comma.

> +};

> +static const struct of_device_id dw9768_of_table[] = {
> +	{ .compatible = "dongwoon,dw9768" },

> +	{ },

Ditto.

> +};

-- 
With Best Regards,
Andy Shevchenko

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel