Subject: [PATCH 3/3] USB: host: ohci-at91: resume: balance the clock start call

From: Nicolas Ferre <[email-masked]>
Date: Wed, 11 Sep 2019 08:41:54 +0200

From: Boris Krasnovskiy <[email-masked]>

There is a clock enable counter run away problem in resume ohci_at91. Code
enables clock that was never disabled in case of non wakeup interface. That
would make clock unstoppable in future.
Use proper alternative to start clocks only if they were stopped before.

Signed-off-by: Boris Krasnovskiy <[email-masked]>
Signed-off-by: Nicolas Ferre <[email-masked]>
---
 drivers/usb/host/ohci-at91.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 85d67fe42d59..513e48397743 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -643,8 +643,8 @@ ohci_hcd_at91_drv_resume(struct device *dev)
 
 	if (ohci_at91->wakeup)
 		disable_irq_wake(hcd->irq);
-
-	at91_start_clock(ohci_at91);
+	else
+		at91_start_clock(ohci_at91);
 
 	ohci_resume(hcd, false);
 
-- 
2.17.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel