Subject: [PATCH v2 3/3] dt-bindings: ddr: Add bindings for Samsung LPDDR3 memories

From: Lukasz Luba <[email-masked]>
Date: Mon, 16 Sep 2019 12:07:04 +0200

Add compatible for Samsung k3qf2f20db LPDDR3 memory bindings.
Introduce minor fixes in the old documentation.

Signed-off-by: Lukasz Luba <[email-masked]>
---
 Documentation/devicetree/bindings/ddr/lpddr3.txt | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/ddr/lpddr3.txt b/Documentation/devicetree/bindings/ddr/lpddr3.txt
index 3b2485b84b3f..49afe794daaa 100644
--- a/Documentation/devicetree/bindings/ddr/lpddr3.txt
+++ b/Documentation/devicetree/bindings/ddr/lpddr3.txt
@@ -1,7 +1,9 @@
 * LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C
 
 Required properties:
-- compatible : Should be  - "jedec,lpddr3"
+- compatible : should be one of the following:
+	Generic default - "jedec,lpddr3".
+	For Samsung 542x SoC - "samsung,K3QF2F20DB", "jedec,lpddr3".
 - density  : <u32> representing density in Mb (Mega bits)
 - io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64
 - #address-cells: Must be set to 1
@@ -43,7 +45,7 @@ Child nodes:
 Example:
 
 samsung_K3QF2F20DB: lpddr3 {
-	compatible	= "Samsung,K3QF2F20DB", "jedec,lpddr3";
+	compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
 	density		= <16384>;
 	io-width	= <32>;
 	#address-cells	= <1>;
@@ -73,7 +75,8 @@ samsung_K3QF2F20DB: lpddr3 {
 
 	timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
 		compatible	= "jedec,lpddr3-timings";
-		reg		= <800000000>; /* workaround: it shows max-freq */
+		/* workaround: 'reg' shows max-freq */
+		reg		= <800000000>;
 		min-freq	= <100000000>;
 		tRFC		= <65000>;
 		tRRD		= <6000>;
-- 
2.17.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel