Subject: [PATCH 2/2] ARM: dts: imx6q: Add ethernet PHY power GPIO

From: Marek Vasut <[email-masked]>
Date: Tue, 17 Sep 2019 16:37:14 +0200

Add missing ethernet PHY power GPIO.

Signed-off-by: Marek Vasut <[email-masked]>
Cc: Fabio Estevam <[email-masked]>
Cc: Ludwig Zenz <[email-masked]>
Cc: Shawn Guo <[email-masked]>
Cc: NXP Linux Team <[email-masked]>
To: [email-masked]
---
 arch/arm/boot/dts/imx6q-dhcom-som.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index 845cfad99bf9..687caedf0784 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -86,6 +86,7 @@
 	pinctrl-0 = <&pinctrl_enet_100M>;
 	phy-mode = "rmii";
 	phy-handle = <&ethphy0>;
+	power-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	mdio {
-- 
2.23.0.rc1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel