Subject: [PATCH 5/5] ARM: dts: stm32: Enable gating of the MAC TX clock during TX low-power mode on stm32mp157c

From: Christophe Roullier <[email-masked]>
Date: Fri, 20 Sep 2019 07:38:17 +0200

When there is no activity on ethernet phy link, the ETH_GTX_CLK is cut

Signed-off-by: Christophe Roullier <[email-masked]>
---
 arch/arm/boot/dts/stm32mp157c.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index f51d6222a0e8..d78dfc44a1fb 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -1293,6 +1293,7 @@
 			st,syscon = <&syscfg 0x4>;
 			snps,mixed-burst;
 			snps,pbl = <2>;
+			snps,en-tx-lpi-clockgating;
 			snps,axi-config = <&stmmac_axi_config_0>;
 			snps,tso;
 			status = "disabled";
-- 
2.17.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel