Subject: Re: [PATCH V2 1/5] dt-bindings: fsl: scu: add scu power key binding

From: Pavel Machek <[email-masked]>
Date: Sun, 22 Sep 2019 18:14:15 +0200

On Tue 2019-09-03 10:03:40, Anson Huang wrote:
> NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as
> system controller, the system controller is in charge of system
> power, clock and power key event etc. management, Linux kernel
> has to communicate with system controller via MU (message unit)
> IPC to get power key event, add binding doc for i.MX system
> controller power key driver.
> 
> Signed-off-by: Anson Huang <[email-masked]>
> ---
> Changes since V1:
> 	- remove "wakeup-source" property, as it is NOT needed for SCU interrupt;
> 	- remove "status" in example.
> ---
>  .../devicetree/bindings/arm/freescale/fsl,scu.txt          | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> index c149fad..f93e2e4 100644
> --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> @@ -157,6 +157,15 @@ Required properties:
>  Optional properties:
>  - timeout-sec: contains the watchdog timeout in seconds.
>  
> +Power key bindings based on SCU Message Protocol
> +------------------------------------------------------------
> +
> +Required properties:
> +- compatible: should be:
> +              "fsl,imx8qxp-sc-pwrkey"
> +              followed by "fsl,imx-sc-pwrkey";
> +- linux,keycodes: See Documentation/devicetree/bindings/input/keys.txt

Note you have keycode_s_ here, but keycode in the example and in the dts patch.

									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel