Subject: [RFT v4 6/8] ARM: dts: exynos: Remove MCT subnode for interrupt map on Exynos5250

From: Krzysztof Kozlowski <[email-masked]>
Date: Mon, 23 Sep 2019 18:14:09 +0200

Multi Core Timer node has interrupts routed to two different parents -
GIC and combiner.  This was modeled with a interrupt-map within a
subnode but can be expressed in an easier and more common way, directly
in the node itself.

Signed-off-by: Krzysztof Kozlowski <[email-masked]>

---

Not tested.

Changes since v3:
1. Use interrupts-extended instead of interrupts-map.
---
 arch/arm/boot/dts/exynos5250.dtsi | 23 ++++++-----------------
 1 file changed, 6 insertions(+), 17 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 7a01349317a3..a549eafd2c64 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -236,25 +236,14 @@
 		timer@101c0000 {
 			compatible = "samsung,exynos4210-mct";
 			reg = <0x101C0000 0x800>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&mct_map>;
-			interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
-				     <4 0>, <5 0>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 			clock-names = "fin_pll", "mct";
-
-			mct_map: mct-map {
-				#interrupt-cells = <2>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0x0 0 &combiner 23 3>,
-						<0x1 0 &combiner 23 4>,
-						<0x2 0 &combiner 25 2>,
-						<0x3 0 &combiner 25 3>,
-						<0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
-						<0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
-			};
+			interrupts-extended = <&combiner 23 3>,
+					      <&combiner 23 4>,
+					      <&combiner 25 2>,
+					      <&combiner 25 3>,
+					      <&gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pinctrl_0: pinctrl@11400000 {
-- 
2.17.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel