Subject: Re: [PATCH v2 05/11] ARM: dts: sun8i: H3: Add Crypto Engine node

From: Corentin Labbe <[email-masked]>
Date: Wed, 2 Oct 2019 10:44:04 +0200

On Wed, Oct 02, 2019 at 08:02:14AM +0200, Maxime Ripard wrote:
> On Tue, Oct 01, 2019 at 08:41:35PM +0200, Corentin Labbe wrote:
> > The Crypto Engine is a hardware cryptographic accelerator that supports
> > many algorithms.
> > It could be found on most Allwinner SoCs.
> >
> > This patch enables the Crypto Engine on the Allwinner H3 SoC Device-tree.
> >
> > Signed-off-by: Corentin Labbe <[email-masked]>
> > ---
> >  arch/arm/boot/dts/sun8i-h3.dtsi | 11 +++++++++++
> >  1 file changed, 11 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> > index e37c30e811d3..778a23a794c9 100644
> > --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> > @@ -153,6 +153,17 @@
> >  			allwinner,sram = <&ve_sram 1>;
> >  		};
> >
> > +		crypto: crypto@1c15000 {
> > +			compatible = "allwinner,sun8i-h3-crypto";
> > +			reg = <0x01c15000 0x1000>;
> > +			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "ce_ns";
> 
> That's not documented in the binding (and I guess unnecessary)
> 

Hello

Yes this should be removed.

> > +			resets = <&ccu RST_BUS_CE>;
> > +			reset-names = "bus";
> > +			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
> > +			clock-names = "bus", "mod";
> 
> Nit: we put the clocks before the resets usually
> 

Will do it.

Thanks
Regards

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel