Subject: [RFCv1 1/5] arm64: dts: meson: Add missing 5V_EN gpio signal for VCC5V regulator

From: Anand Moon <[email-masked]>
Date: Mon, 7 Oct 2019 13:16:45 +0000

As per schematics add missing 5V_EN gpio signal to enable
VCC5V regulator node.

Fixes: c35f6dc5c377 (arm64: dts: meson: Add minimal support for Odroid-N2)
Cc: Martin Blumenstingl <[email-masked]>
Cc: Jerome Brunet <[email-masked]>
Cc: Neil Armstrong <[email-masked]>
Signed-off-by: Anand Moon <[email-masked]>
---
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 42f15405750c..a9a661258886 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -94,6 +94,9 @@
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 		vin-supply = <&main_12v>;
+		/* U12 NB679GD 5V_EN */
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
 	};
 
 	vcc_1v8: regulator-vcc_1v8 {
-- 
2.23.0

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel