Subject: Re: [PATCH v3 01/10] dt-bindings: sram: Convert SRAM bindings to json-schema

From: Rob Herring <[email-masked]>
Date: Thu, 10 Oct 2019 14:12:40 -0500

On Wed, Oct 02, 2019 at 06:43:07PM +0200, Krzysztof Kozlowski wrote:
> Convert generic mmio-sram bindings to DT schema format using
> json-schema.  Require the address/size cells to be 1, not equal to root
> node.
> 
> Signed-off-by: Krzysztof Kozlowski <[email-masked]>
> 
> ---
> 
> Changes since v2:
> 1. Add Rob as maintainer,
> 2. Use "contains" for compatible,
> 3. Fix address and size cells to 1,
> 4. Add maxitems to reg under children,
> 5. Remove unneeded string type from label.
> 
> Changes since v1:
> 1. Indent example with four spaces (more readable).
> ---
>  .../devicetree/bindings/sram/sram.txt         |  80 -----------
>  .../devicetree/bindings/sram/sram.yaml        | 134 ++++++++++++++++++
>  2 files changed, 134 insertions(+), 80 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sram/sram.txt
>  create mode 100644 Documentation/devicetree/bindings/sram/sram.yaml

> diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
> new file mode 100644
> index 000000000000..a1c1ec2183f2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sram/sram.yaml
> @@ -0,0 +1,134 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sram/sram.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Generic on-chip SRAM
> +
> +maintainers:
> +  - Rob Herring <[email-masked]>
> +
> +description: |+
> +  Simple IO memory regions to be managed by the genalloc API.
> +
> +  Each child of the sram node specifies a region of reserved memory. Each
> +  child node should use a 'reg' property to specify a specific range of
> +  reserved memory.
> +
> +  Following the generic-names recommended practice, node names should
> +  reflect the purpose of the node. Unit address (@<address>) should be
> +  appended to the name.
> +
> +properties:
> +  $nodename:
> +    pattern: "^sram(@.*)?"
> +
> +  compatible:
> +    contains:
> +      enum:
> +        - mmio-sram
> +        - atmel,sama5d2-securam
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 1
> +
> +  ranges:
> +    description:
> +      Should translate from local addresses within the sram to bus addresses.
> +
> +  no-memory-wc:
> +    description:
> +      The flag indicating, that SRAM memory region has not to be remapped
> +      as write combining. WC is used by default.
> +    type: boolean
> +
> +patternProperties:
> +  "^([a-z]*-)?sram@[a-f0-9]$":
> +    type: object
> +    description:
> +      Each child of the sram node specifies a region of reserved memory.
> +    properties:
> +      reg:
> +        description:
> +          IO mem address range, relative to the SRAM range.
> +        maxItems: 1
> +
> +      compatible:
> +        $ref: /schemas/types.yaml#/definitions/string

No need to define the type again. We can say 'maxItems: 1' if we really 
want to force it to 1 entry.

> +        description:
> +          Should contain a vendor specific string in the form
> +          <vendor>,[<device>-]<usage>
> +
> +      pool:
> +        description:
> +          Indicates that the particular reserved SRAM area is addressable
> +          and in use by another device or devices.
> +        type: boolean
> +
> +      export:
> +        description:
> +          Indicates that the reserved SRAM area may be accessed outside
> +          of the kernel, e.g. by bootloader or userspace.
> +        type: boolean
> +
> +      protect-exec:
> +        description: |
> +          Same as 'pool' above but with the additional constraint that code
> +          will be run from the region and that the memory is maintained as
> +          read-only, executable during code execution. NOTE: This region must
> +          be page aligned on start and end in order to properly allow
> +          manipulation of the page attributes.
> +        type: boolean
> +
> +      label:
> +        description:
> +          The name for the reserved partition, if omitted, the label is taken
> +          from the node name excluding the unit address.
> +
> +      clocks:

Shouldn't this be up one level? Looks like this is the only case 
(Marvell and i.MX are the only ones I see with clocks).

> +        description:
> +          A list of phandle and clock specifier pair that controls the
> +          single SRAM clock.

maxItems: 1

> +
> +    required:
> +      - reg
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges

Does 'additionalProperties' work here and/or in the child node? I guess 
not if we keep some node names.

> +
> +examples:
> +  - |
> +    sram: sram@5c000000 {
> +        compatible = "mmio-sram";
> +        reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
> +
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges = <0 0x5c000000 0x40000>;
> +
> +        smp-sram@100 {
> +            compatible = "socvendor,smp-sram";
> +            reg = <0x100 0x50>;
> +        };
> +
> +        device-sram@1000 {
> +            reg = <0x1000 0x1000>;
> +            pool;
> +        };
> +
> +        exported@20000 {

This one doesn't match the pattern. That's fine I guess for dts files, 
but examples should be good examples.

> +            reg = <0x20000 0x20000>;
> +            export;
> +        };
> +    };
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel