Subject: [PATCH] phy: stm32: fix use of integer as pointer

From: Ben Dooks <[email-masked]>
Date: Tue, 15 Oct 2019 14:51:48 +0100

The calls devm_clk_get() and devm_reset_control_get()
take pointers so change the 0 to NULl to fix the
following sparse warnings:

drivers/phy/st/phy-stm32-usbphyc.c:330:42: warning: Using plain integer as NULL pointer
drivers/phy/st/phy-stm32-usbphyc.c:343:52: warning: Using plain integer as NULL pointer

Signed-off-by: Ben Dooks <[email-masked]>
---
Cc: Kishon Vijay Abraham I <[email-masked]>
Cc: Maxime Coquelin <[email-masked]>
Cc: Alexandre Torgue <[email-masked]>
Cc: [email-masked]
Cc: [email-masked]
Cc: [email-masked]
---
 drivers/phy/st/phy-stm32-usbphyc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index 56bdea4b0bd9..2b3639cba51a 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -327,7 +327,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
 	if (IS_ERR(usbphyc->base))
 		return PTR_ERR(usbphyc->base);
 
-	usbphyc->clk = devm_clk_get(dev, 0);
+	usbphyc->clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(usbphyc->clk)) {
 		ret = PTR_ERR(usbphyc->clk);
 		dev_err(dev, "clk get failed: %d\n", ret);
@@ -340,7 +340,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	usbphyc->rst = devm_reset_control_get(dev, 0);
+	usbphyc->rst = devm_reset_control_get(dev, NULL);
 	if (!IS_ERR(usbphyc->rst)) {
 		reset_control_assert(usbphyc->rst);
 		udelay(2);
-- 
2.23.0

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel