From: Joris Offouga <offougajoris@gmail•com>
To: linux-arm-kernel@lists•infradead.org
Cc: Mark Rutland <mark.rutland@arm•com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger•kernel.org>,
Otavio Salvador <otavio@ossystems•com.br>,
Shawn Guo <shawnguo@kernel•org>,
Sascha Hauer <s.hauer@pengutronix•de>,
open list <linux-kernel@vger•kernel.org>,
Joris Offouga <offougajoris@gmail•com>,
Rob Herring <robh+dt@kernel•org>,
NXP Linux Team <linux-imx@nxp•com>,
Pengutronix Kernel Team <kernel@pengutronix•de>,
Fabio Estevam <festevam@gmail•com>
Subject: [PATCH] ARM: dts: imx7d-pico: Add LCD support
Date: Fri, 25 Oct 2019 10:22:38 +0200 [thread overview]
Message-ID: <20191025082247.3371-1-offougajoris@gmail.com> (raw)
Add support for the VXT VL050-8048NT-C01 panel connected through
the 24 bit parallel LCDIF interface.
Signed-off-by: Joris Offouga <offougajoris@gmail•com>
Signed-off-by: Fabio Estevam <festevam@gmail•com>
Signed-off-by: Otavio Salvador <otavio@ossystems•com.br>
---
arch/arm/boot/dts/imx7d-pico.dtsi | 84 +++++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index 6f50ebf31a0a..9042b1e6f1db 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -69,6 +69,37 @@
clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
clock-names = "ext_clock";
};
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ pwms = <&pwm4 0 50000 0>;
+ brightness-levels = <0 36 72 108 144 180 216 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ panel {
+ compatible = "vxt,vl050-8048nt-c01";
+ backlight = <&backlight>;
+ power-supply = <®_lcd_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
};
&clks {
@@ -230,6 +261,18 @@
};
};
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif>;
+ status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
&sai1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1>;
@@ -349,6 +392,13 @@
};
&iomuxc {
+
+ pinctrl_backlight: backlight {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x0
+ >;
+ };
+
pinctrl_ecspi3: ecspi3grp {
fsl,pins = <
MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2
@@ -413,6 +463,40 @@
>;
};
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x78
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x78
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x78
+ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14
+ >;
+ };
+
pinctrl_pwm1: pwm1 {
fsl,pins = <
MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x7f
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-10-25 8:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-25 8:22 Joris Offouga [this message]
2019-10-25 13:42 ` [PATCH] ARM: dts: imx7d-pico: Add LCD support Fabio Estevam
2019-10-25 18:45 ` Marco Felsch
2019-10-25 21:16 ` Joris Offouga
2019-10-26 19:20 ` Fabio Estevam
2019-10-26 20:29 ` Joris Offouga
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191025082247.3371-1-offougajoris@gmail.com \
--to=offougajoris@gmail$(echo .)com \
--cc=devicetree@vger$(echo .)kernel.org \
--cc=festevam@gmail$(echo .)com \
--cc=kernel@pengutronix$(echo .)de \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
--cc=linux-imx@nxp$(echo .)com \
--cc=linux-kernel@vger$(echo .)kernel.org \
--cc=mark.rutland@arm$(echo .)com \
--cc=otavio@ossystems$(echo .)com.br \
--cc=robh+dt@kernel$(echo .)org \
--cc=s.hauer@pengutronix$(echo .)de \
--cc=shawnguo@kernel$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox