Subject: Re: [PATCH 2/3] arm64: dts: freescale: Add devicetree support for Thor96 board

From: Shawn Guo <[email-masked]>
Date: Mon, 28 Oct 2019 19:51:12 +0800

On Thu, Oct 24, 2019 at 08:12:34PM +0530, Manivannan Sadhasivam wrote:
> Add devicetree support for Thor96 board from Einfochips. This board is
> one of the 96Boards Consumer Edition platform powered by the NXP
> i.MX8MQ SoC.
> 
> Following are the features supported currently:
> 
> 1. uSD
> 2. WiFi/BT
> 3. Ethernet
> 4. EEPROM (M24256)
> 5. NOR Flash (W25Q256JW)
> 6. 2xUSB3.0 ports and 1xUSB2.0 port at HS expansion
> 
> More information about this board can be found in Arrow website:
> https://www.arrow.com/en/products/i.imx8-thor96/arrow-development-tools
> 
> Link to 96Boards CE Specification: https://linaro.co/ce-specification
> 
> Signed-off-by: Darshak Patel <[email-masked]>
> [Mani: cleaned up for upstream]
> Signed-off-by: Manivannan Sadhasivam <[email-masked]>
> ---
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../boot/dts/freescale/imx8mq-thor96.dts      | 581 ++++++++++++++++++
>  2 files changed, 582 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 93fce8f0c66d..dec1662019be 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
> new file mode 100644
> index 000000000000..e1adf24c2602
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
> @@ -0,0 +1,581 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019 Einfochips
> + * Copyright 2019 Linaro Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mq.dtsi"
> +
> +/ {
> +	model = "Einfochips i.MX8MQ Thor96";
> +	compatible = "einfochips,imx8mq-thor96", "fsl,imx8mq";
> +
> +	chosen {
> +		stdout-path = &uart1;
> +	};
> +
> +	memory@40000000 {
> +		device_type = "memory";
> +		reg = <0x00000000 0x40000000 0 0x80000000>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_leds>;
> +
> +		user-led1 {
> +			label = "green:user1";
> +			gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +
> +		user-led2 {
> +			label = "green:user2";
> +			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "none";

I see linux,default-trigger is defined in Documentation/devicetree/bindings/leds/common.txt
with given string values. "none" and the following ones are not there.
I'm not sure how this works.

> +		};
> +
> +		user-led3 {
> +			label = "green:user3";
> +			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "mmc1";
> +			default-state = "off";
> +		};
> +
> +		user-led4 {
> +			label = "green:user4";
> +			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
> +			panic-indicator;
> +			linux,default-trigger = "none";
> +		};
> +
> +		wlan-active-led {
> +			label = "yellow:wlan";
> +			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "phy0tx";
> +			default-state = "off";
> +		};
> +
> +		bt-active-led {
> +			label = "blue:bt";
> +			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "hci0-power";
> +			default-state = "off";
> +		};
> +	};
> +
> +	reg_usdhc1_vmmc: reg-usdhc1-vmmc {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDD_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};
> +
> +	reg_usdhc1_vqmmc: reg-usdhc1-vqmmc {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VCC_1V8_EXT";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-always-on;
> +	};
> +
> +	reg_usdhc2_vmmc: reg-usdhc2-vmmc {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VSD_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_usdhc2>;
> +		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	reg_usdhc2_vqmmc: reg-usdhc2-vqmmc {
> +		compatible = "regulator-fixed";
> +		regulator-name = "NVCC_SD2";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};
> +
> +	sdio_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_wifi_reg_on>;
> +		gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
> +	};
> +};
> +
> +/* LS-SPI0 */
> +&ecspi2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi2>;
> +	status = "okay";
> +};
> +
> +&fec1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec1>;
> +	phy-mode = "rgmii-id";
> +	phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
> +	phy-handle = <&ethphy>;
> +	fsl,magic-packet;
> +	status = "okay";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy: ethernet-phy@3 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
> +			reg = <3>;
> +		};
> +	};
> +};
> +
> +/* LS-I2C0 */
> +&i2c1 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +
> +	pmic@8 {
> +		compatible = "fsl,pfuze100";
> +		reg = <0x8>;
> +
> +		regulators {
> +			sw1a_reg: sw1ab {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +			};
> +
> +			sw1c_reg: sw1c {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +			};
> +
> +			sw2_reg: sw2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			sw3a_reg: sw3ab {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-always-on;
> +			};
> +
> +			sw4_reg: sw4 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			swbst_reg: swbst {
> +				regulator-min-microvolt = <5000000>;
> +				regulator-max-microvolt = <5150000>;
> +			};
> +
> +			snvs_reg: vsnvs {
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-always-on;
> +			};
> +
> +			vref_reg: vrefddr {
> +				regulator-always-on;
> +			};
> +
> +			vgen1_reg: vgen1 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +			};
> +
> +			vgen2_reg: vgen2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen3_reg: vgen3 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen4_reg: vgen4 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen5_reg: vgen5 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen6_reg: vgen6 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +			};
> +		};
> +	};
> +};
> +
> +/* LS-I2C1 */
> +&i2c2 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	eeprom: eeprom@50 {
> +		compatible = "atmel,24c256";
> +		reg = <0x50>;
> +	};
> +};
> +
> +/* HS-I2C2 */
> +&i2c3 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +	status = "okay";
> +};
> +
> +/* HS-I2C3 */
> +&i2c4 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c4>;
> +	status = "okay";
> +};
> +
> +&pgc_gpu {
> +	power-supply = <&sw1a_reg>;
> +};
> +
> +&pgc_vpu {
> +	power-supply = <&sw1c_reg>;
> +};
> +
> +&qspi0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_qspi0>;
> +	status = "okay";
> +
> +	flash@0 {
> +		compatible = "jedec,spi-nor";
> +		spi-max-frequency = <100000000>;
> +		reg = <0>;
> +	};
> +};
> +
> +/* Debug UART */
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
> +	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
> +	status = "okay";
> +};
> +
> +/* LS-UART0 */
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
> +	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> +	fsl,uart-has-rtscts;

uart-has-rtscts

Shawn

> +	status = "okay";
> +
> +	bluetooth {
> +		compatible = "brcm,bcm43438-bt";
> +		device-wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> +		host-wakeup-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
> +		shutdown-gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_bt_gpios>;
> +	};
> +};
> +
> +/* LS-UART1 */
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart3>;
> +	assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
> +	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
> +	status = "okay";
> +};
> +
> +&usb3_phy1 {
> +	status = "okay";
> +};
> +
> +&usb_dwc3_1 {
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +/* SDIO */
> +&usdhc1 {
> +	#address-cells = <0x1>;
> +	#size-cells = <0x0>;
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> +	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> +	vmmc-supply = <&reg_usdhc1_vmmc>;
> +	vqmmc-supply = <&reg_usdhc1_vqmmc>;
> +	mmc-pwrseq = <&sdio_pwrseq>;
> +	bus-width = <4>;
> +	non-removable;
> +	no-sd;
> +	no-emmc;
> +	status = "okay";
> +
> +	brcmf: wifi@1 {
> +		reg = <1>;
> +		compatible = "brcm,bcm4329-fmac";
> +	};
> +};
> +
> +/* uSD */
> +&usdhc2 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> +	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> +	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> +	vmmc-supply = <&reg_usdhc2_vmmc>;
> +	vqmmc-supply = <&reg_usdhc2_vqmmc>;
> +	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> +	bus-width = <4>;
> +	no-sdio;
> +	no-emmc;
> +	disable-wp;
> +	status = "okay";
> +};
> +
> +&wdog1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_wdog>;
> +	fsl,ext-reset-output;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl_bt_gpios: btgpiosgrp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x19
> +			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14		0x19
> +			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x19
> +		>;
> +	};
> +
> +	pinctrl_ecspi2: ecspi2grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x16
> +			MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x16
> +			MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x16
> +			MX8MQ_IOMUXC_ECSPI2_SS0_ECSPI2_SS0		0x16
> +		>;
> +	};
> +
> +	pinctrl_fec1: fec1grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x4
> +			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x24
> +			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1c
> +			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1c
> +			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1c
> +			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1c
> +			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
> +			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
> +			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
> +			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
> +			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1c
> +			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
> +			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
> +			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1c
> +			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
> +		>;
> +	};
> +
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
> +			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL			0x4000007f
> +			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA			0x4000007f
> +		>;
> +	};
> +
> +	pinctrl_i2c3: i2c3grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL			0x4000007f
> +			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA			0x4000007f
> +		>;
> +	};
> +
> +	pinctrl_i2c4: i2c4grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL			0x4000007f
> +			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA			0x4000007f
> +		>;
> +	};
> +
> +	pinctrl_leds: ledsgrp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21		0x19
> +			MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22		0x19
> +			MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
> +			MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29		0x19
> +			MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19
> +			MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x19
> +		>;
> +	};
> +
> +	pinctrl_qspi0: qspi0grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x82
> +			MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82
> +			MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x82
> +			MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x82
> +			MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82
> +			MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82
> +
> +		>;
> +	};
> +
> +	pinctrl_reg_usdhc2: regusdhc2grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
> +		>;
> +	};
> +
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
> +			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
> +		>;
> +	};
> +
> +	pinctrl_uart2: uart2grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
> +			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
> +			MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B		0x49
> +			MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B		0x49
> +		>;
> +	};
> +
> +	pinctrl_uart3: uart3grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
> +			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
> +		>;
> +	};
> +
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
> +			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
> +			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
> +			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
> +			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
> +			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
> +			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
> +		>;
> +	};
> +
> +	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
> +			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
> +			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
> +			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
> +			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
> +			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
> +			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
> +		>;
> +	};
> +
> +	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
> +			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
> +			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
> +			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
> +			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
> +			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
> +			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41
> +		>;
> +	};
> +
> +	pinctrl_usdhc2: usdhc2grp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
> +			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
> +			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
> +			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
> +			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
> +			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
> +			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x8c
> +			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xcc
> +			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xcc
> +			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xcc
> +			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xcc
> +			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xcc
> +			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x9c
> +			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xdc
> +			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xdc
> +			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xdc
> +			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xdc
> +			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xdc
> +			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xcc
> +		>;
> +	};
> +
> +	pinctrl_wdog: wdoggrp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
> +		>;
> +	};
> +
> +	pinctrl_wifi_reg_on: wifiregongrp {
> +		fsl,pins = <
> +			MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x17059
> +		>;
> +	};
> +};
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel