Subject: Re: [PATCH net-next 2/3] net: stmmac: xgmac: Add C45 PHY support in the MDIO callbacks

From: Andrew Lunn <[email-masked]>
Date: Wed, 30 Oct 2019 17:28:29 +0100

On Wed, Oct 30, 2019 at 04:28:49PM +0100, Jose Abreu wrote:
> Add the support for C45 PHYs in the MDIO callbacks for XGMAC. This was
> tested using Synopsys DesignWare XPCS.
> 
> Signed-off-by: Jose Abreu <[email-masked]>
> 
> ---
> Cc: Giuseppe Cavallaro <[email-masked]>
> Cc: Alexandre Torgue <[email-masked]>
> Cc: Jose Abreu <[email-masked]>
> Cc: "David S. Miller" <[email-masked]>
> Cc: Maxime Coquelin <[email-masked]>
> Cc: [email-masked]
> Cc: [email-masked]
> Cc: [email-masked]
> Cc: [email-masked]
> ---
>  drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 47 +++++++++++++++++++++--
>  1 file changed, 43 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> index 40c42637ad75..143bffd28acf 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> @@ -41,6 +41,29 @@
>  #define MII_XGMAC_BUSY			BIT(22)
>  #define MII_XGMAC_MAX_C22ADDR		3
>  #define MII_XGMAC_C22P_MASK		GENMASK(MII_XGMAC_MAX_C22ADDR, 0)
> +#define MII_XGMAC_PA_SHIFT		16
> +#define MII_XGMAC_DA_SHIFT		21
> +
> +static int stmmac_xgmac2_c45_format(struct stmmac_priv *priv, int phyaddr,
> +				    int phyreg, u32 *hw_addr)
> +{
> +	unsigned int mii_data = priv->hw->mii.data;
> +	u32 tmp;
> +
> +	/* Wait until any existing MII operation is complete */
> +	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
> +			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
> +		return -EBUSY;

Hi Jose

The stmmac_xgmac2_c22_format function does the same. Maybe the call
can be pulled out into stmmac_xgmac2_mdio_write() and
stmmac_xgmac2_mdio_read()?

	Andrew

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel