Subject: Re: [PATCH v2 1/4] dt-bindings: leds: Document commonly used LED triggers

From: Rob Herring <[email-masked]>
Date: Tue, 5 Nov 2019 16:04:08 -0600

On Wed, Oct 30, 2019 at 02:31:21PM +0530, Manivannan Sadhasivam wrote:
> This commit documents the LED triggers used commonly in the SoCs. Not
> all triggers are documented as some of them are very application specific.
> Most of the triggers documented here are currently used in devicetrees
> of many SoCs.

I guess it's worth documenting these, but you plan to use 'function' 
instead, right?

> 
> Cc: Jacek Anaszewski <[email-masked]>
> Cc: Pavel Machek <[email-masked]>
> Cc: Dan Murphy <[email-masked]>
> Cc: [email-masked]
> Signed-off-by: Manivannan Sadhasivam <[email-masked]>
> ---
>  .../devicetree/bindings/leds/common.txt         | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)

Acked-by: Rob Herring <[email-masked]>

> 
> diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
> index 9fa6f9795d50..2a6806161590 100644
> --- a/Documentation/devicetree/bindings/leds/common.txt
> +++ b/Documentation/devicetree/bindings/leds/common.txt
> @@ -55,6 +55,23 @@ Optional properties for child nodes:
>       "timer" - LED flashes at a fixed, configurable rate
>       "pattern" - LED alters the brightness for the specified duration with one
>                   software timer (requires "led-pattern" property)
> +     "mmc[N]" - LED indicates [N]th MMC storage activity
> +     "flash" - LED indicates camera flash state
> +     "torch" - LED indicates camera torch state
> +     "audio-mute" - LED indicates audio mute state
> +     "audio-micmute" - LED indicates mic mute state
> +     "bluetooth-power" - LED indicates bluetooth power state
> +     "usb-gadget" - LED indicates USB gadget activity
> +     "usb-host" - LED indicates USB host activity
> +     "mtd" - LED indicates MTD memory activity
> +     "nand-disk" - LED indicates NAND memory activity (deprecated),
> +                  in new implementations use "mtd"
> +     "disk-read" - LED indicates disk read activity
> +     "disk-write" - LED indicates disk write activity
> +     "none" - No trigger assigned to the LED. This is the default mode
> +              if trigger is absent
> +     "cpu" - LED indicates activity of all CPUs
> +     "cpu[N]" - LED indicates activity of [N]th CPU
>  
>  - led-pattern : Array of integers with default pattern for certain triggers.
>                  Each trigger may parse this property differently:
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel