Subject: Re: [Patch v2 3/5] ARM: dts: dra7: add vpe clkctrl node

From: Tony Lindgren <[email-masked]>
Date: Fri, 8 Nov 2019 08:55:54 -0800

Hi,

* Benoit Parrot <[email-masked]> [191104 20:39]:
> Add clkctrl nodes for VPE module.

Can you please add a comment describing that we currently need to
use custom node names here instead of the standard naming?

I can queue this and other dts change once I have an immutable clock
changes branch from Tero.

Or if Tero wants to also pick up the clock node dtsi patch I can ack it,
up to Tero.

Regards,

Tony

> Signed-off-by: Benoit Parrot <[email-masked]>
> ---
>  arch/arm/boot/dts/dra7xx-clocks.dtsi | 18 ++++++++++++++++--
>  1 file changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
> index 93e1eb83bed9..d1c2406ec71c 100644
> --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
> +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
> @@ -1591,10 +1591,10 @@
>  
>  	rtc_cm: rtc-cm@700 {
>  		compatible = "ti,omap4-cm";
> -		reg = <0x700 0x100>;
> +		reg = <0x700 0x60>;
>  		#address-cells = <1>;
>  		#size-cells = <1>;
> -		ranges = <0 0x700 0x100>;
> +		ranges = <0 0x700 0x60>;
>  
>  		rtc_clkctrl: rtc-clkctrl@20 {
>  			compatible = "ti,clkctrl";
> @@ -1603,6 +1603,20 @@
>  		};
>  	};
>  
> +	vpe_cm: vpe-cm@760 {
> +		compatible = "ti,omap4-cm";
> +		reg = <0x760 0xc>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0x760 0xc>;
> +
> +		vpe_clkctrl: vpe-clkctrl@0 {
> +			compatible = "ti,clkctrl";
> +			reg = <0x0 0xc>;
> +			#clock-cells = <2>;
> +		};
> +	};
> +
>  };
>  
>  &cm_core {
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel