Subject: [PATCH net, v2 1/3] net: ethernet: mediatek: Integrate GDM/PSE setup operations

From: MarkLee <[email-masked]>
Date: Mon, 11 Nov 2019 14:51:27 +0800

Integrate GDM/PSE setup operations into single function "mtk_gdm_config"

Signed-off-by: MarkLee <[email-masked]>
--
v1->v2:
* Use the macro "MTK_MAC_COUNT" instead of a magic constant

---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 37 +++++++++++++--------
 drivers/net/ethernet/mediatek/mtk_eth_soc.h |  1 +
 2 files changed, 24 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 703adb96429e..6e7a7fea2f52 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2180,6 +2180,28 @@ static int mtk_start_dma(struct mtk_eth *eth)
 	return 0;
 }
 
+static void mtk_gdm_config(struct mtk_eth *eth, u32 config)
+{
+	int i;
+
+	for (i = 0; i < MTK_MAC_COUNT; i++) {
+		u32 val = mtk_r32(eth, MTK_GDMA_FWD_CFG(i));
+
+		/* default setup the forward port to send frame to PDMA */
+		val &= ~0xffff;
+
+		/* Enable RX checksum */
+		val |= MTK_GDMA_ICS_EN | MTK_GDMA_TCS_EN | MTK_GDMA_UCS_EN;
+
+		val |= config;
+
+		mtk_w32(eth, val, MTK_GDMA_FWD_CFG(i));
+	}
+	/*Reset and enable PSE*/
+	mtk_w32(eth, RST_GL_PSE, MTK_RST_GL);
+	mtk_w32(eth, 0, MTK_RST_GL);
+}
+
 static int mtk_open(struct net_device *dev)
 {
 	struct mtk_mac *mac = netdev_priv(dev);
@@ -2375,8 +2397,6 @@ static int mtk_hw_init(struct mtk_eth *eth)
 	mtk_w32(eth, 0, MTK_QDMA_DELAY_INT);
 	mtk_tx_irq_disable(eth, ~0);
 	mtk_rx_irq_disable(eth, ~0);
-	mtk_w32(eth, RST_GL_PSE, MTK_RST_GL);
-	mtk_w32(eth, 0, MTK_RST_GL);
 
 	/* FE int grouping */
 	mtk_w32(eth, MTK_TX_DONE_INT, MTK_PDMA_INT_GRP1);
@@ -2385,18 +2405,7 @@ static int mtk_hw_init(struct mtk_eth *eth)
 	mtk_w32(eth, MTK_RX_DONE_INT, MTK_QDMA_INT_GRP2);
 	mtk_w32(eth, 0x21021000, MTK_FE_INT_GRP);
 
-	for (i = 0; i < MTK_MAC_COUNT; i++) {
-		u32 val = mtk_r32(eth, MTK_GDMA_FWD_CFG(i));
-
-		/* setup the forward port to send frame to PDMA */
-		val &= ~0xffff;
-
-		/* Enable RX checksum */
-		val |= MTK_GDMA_ICS_EN | MTK_GDMA_TCS_EN | MTK_GDMA_UCS_EN;
-
-		/* setup the mac dma */
-		mtk_w32(eth, val, MTK_GDMA_FWD_CFG(i));
-	}
+	mtk_gdm_config(eth, MTK_GDMA_TO_PDMA);
 
 	return 0;
 
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 76bd12cb8150..b16d8d9b196a 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -84,6 +84,7 @@
 #define MTK_GDMA_ICS_EN		BIT(22)
 #define MTK_GDMA_TCS_EN		BIT(21)
 #define MTK_GDMA_UCS_EN		BIT(20)
+#define MTK_GDMA_TO_PDMA	0x0
 
 /* Unicast Filter MAC Address Register - Low */
 #define MTK_GDMA_MAC_ADRL(x)	(0x508 + (x * 0x1000))
-- 
2.17.1
_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel