Subject: Re: [PATCH v3 3/8] ARM: dts: Prepare Realtek RTD1195 and MeLE X1000

From: Marc Zyngier <[email-masked]>
Date: Sun, 17 Nov 2019 10:47:26 +0000

On Sun, 17 Nov 2019 08:21:04 +0100
Andreas Färber <[email-masked]> wrote:

Hi Andreas,

> Add Device Trees for Realtek RTD1195 SoC and MeLE X1000 TV box.
> 
> Reuse the existing RTD1295 watchdog compatible for now.
> 
> Reviewed-by: Rob Herring <[email-masked]>
> [AF: Fixed r-bus size, fixed GIC CPU mask, updated memreserve]
> Signed-off-by: Andreas Färber <[email-masked]>
> ---
>  v2 -> v3:
>  * Fixed r-bus size in /soc ranges from 0x1000000 to 0x70000 (James)
>  * Adjusted /memreserve/ to close gap from 0xa800 to 0xc000 for full 0x100000
>  * Changed arch timer from GIC_CPU_MASK_RAW(0xf) to GIC_CPU_MASK_SIMPLE(2)
>    squashed from RTD1395 v1 series
>  
>  v1 -> v2:
>  * Dropped /memreserve/ and reserved-memory nodes for peripherals and NOR (Rob)
>  * Carved them out from memory reg instead (Rob)
>  * Converted some /memreserve/s to reserved-memory nodes
>  
>  arch/arm/boot/dts/Makefile               |   2 +
>  arch/arm/boot/dts/rtd1195-mele-x1000.dts |  31 ++++++++
>  arch/arm/boot/dts/rtd1195.dtsi           | 127 +++++++++++++++++++++++++++++++
>  3 files changed, 160 insertions(+)
>  create mode 100644 arch/arm/boot/dts/rtd1195-mele-x1000.dts
>  create mode 100644 arch/arm/boot/dts/rtd1195.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 08011dc8c7a6..4853a13c8cf2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -865,6 +865,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>  dtb-$(CONFIG_ARCH_RDA) += \
>  	rda8810pl-orangepi-2g-iot.dtb \
>  	rda8810pl-orangepi-i96.dtb
> +dtb-$(CONFIG_ARCH_REALTEK) += \
> +	rtd1195-mele-x1000.dtb
>  dtb-$(CONFIG_ARCH_REALVIEW) += \
>  	arm-realview-pb1176.dtb \
>  	arm-realview-pb11mp.dtb \
> diff --git a/arch/arm/boot/dts/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
> new file mode 100644
> index 000000000000..834b430e6250
> --- /dev/null
> +++ b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
> @@ -0,0 +1,31 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> +/*
> + * Copyright (c) 2017-2019 Andreas Färber
> + */
> +
> +/dts-v1/;
> +
> +#include "rtd1195.dtsi"
> +
> +/ {
> +	compatible = "mele,x1000", "realtek,rtd1195";
> +	model = "MeLE X1000";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x18000000>,
> +		      <0x19100000 0x26f00000>;
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
> new file mode 100644
> index 000000000000..4e3866fe8f6e
> --- /dev/null
> +++ b/arch/arm/boot/dts/rtd1195.dtsi
> @@ -0,0 +1,127 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> +/*
> + * Copyright (c) 2017-2019 Andreas Färber
> + */
> +
> +/memreserve/ 0x00000000 0x0000a800; /* boot code */
> +/memreserve/ 0x0000a800 0x000f5800;
> +/memreserve/ 0x17fff000 0x00001000;
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	compatible = "realtek,rtd1195";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x0>;
> +			clock-frequency = <1000000000>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x1>;
> +			clock-frequency = <1000000000>;
> +		};
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		rpc_comm: rpc@b000 {
> +			reg = <0x0000b000 0x1000>;
> +		};
> +
> +		audio@1b00000 {
> +			reg = <0x01b00000 0x400000>;
> +		};
> +
> +		rpc_ringbuf: rpc@1ffe000 {
> +			reg = <0x01ffe000 0x4000>;
> +		};
> +
> +		secure@10000000 {
> +			reg = <0x10000000 0x100000>;
> +			no-map;
> +		};
> +	};
> +
> +	arm-pmu {
> +		compatible = "arm,cortex-a7-pmu";
> +		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-affinity = <&cpu0>, <&cpu1>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv7-timer";
> +		interrupts = <GIC_PPI 13
> +			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14
> +			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11
> +			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10
> +			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
> +		clock-frequency = <27000000>;

This is 2019, and yet it feels like 2011. This should be setup in the
bootloader, not in DT...

> +	};
> +
> +	osc27M: osc {
> +		compatible = "fixed-clock";
> +		clock-frequency = <27000000>;
> +		#clock-cells = <0>;
> +		clock-output-names = "osc27M";
> +	};
> +
> +	soc {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x18000000 0x18000000 0x00070000>,
> +		         <0x18100000 0x18100000 0x01000000>,
> +		         <0x40000000 0x40000000 0xc0000000>;
> +
> +		wdt: watchdog@18007680 {
> +			compatible = "realtek,rtd1295-watchdog";
> +			reg = <0x18007680 0x100>;
> +			clocks = <&osc27M>;
> +		};
> +
> +		uart0: serial@18007800 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x18007800 0x400>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			clock-frequency = <27000000>;
> +			status = "disabled";
> +		};
> +
> +		uart1: serial@1801b200 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0x1801b200 0x100>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			clock-frequency = <27000000>;
> +			status = "disabled";
> +		};
> +
> +		gic: interrupt-controller@ff011000 {
> +			compatible = "arm,cortex-a7-gic";
> +			reg = <0xff011000 0x1000>,
> +			      <0xff012000 0x2000>;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;

You know what I'm going to say: GICH and GIV are missing, as well as
the maintenance interrupt. This is all bog-standard HW (most probably a
GIC400), so there is no reason for this information not to be present.

	M.
-- 
Without deviation from the norm, progress is not possible.

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel