Subject: [PATCH AUTOSEL 4.19 029/219] ARM: OMAP1: fix USB configuration for device-only setups

From: Sasha Levin <[email-masked]>
Date: Fri, 22 Nov 2019 00:46:01 -0500

From: Aaro Koskinen <[email-masked]>

[ Upstream commit c7b7b5cbd0c859b1546a5a3455d457708bdadf4c ]

Currently we do USB configuration only if the host mode (CONFIG_USB)
is enabled. But it should be done also in the case of device-only setups,
so change the condition to CONFIG_USB_SUPPORT. This allows to use
omap_udc on Palm Tungsten E.

Signed-off-by: Aaro Koskinen <[email-masked]>
Signed-off-by: Tony Lindgren <[email-masked]>
Signed-off-by: Sasha Levin <[email-masked]>
---
 arch/arm/mach-omap1/Makefile           | 2 +-
 arch/arm/mach-omap1/include/mach/usb.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index e8ccf51c6f292..ec0235899de20 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -25,7 +25,7 @@ obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
 
 led-y := leds.o
 
-usb-fs-$(CONFIG_USB)			:= usb.o
+usb-fs-$(CONFIG_USB_SUPPORT)		:= usb.o
 obj-y					+= $(usb-fs-m) $(usb-fs-y)
 
 # Specific board support
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
index 77867778d4ec7..5429d86c7190d 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -11,7 +11,7 @@
 
 #include <linux/platform_data/usb-omap1.h>
 
-#if IS_ENABLED(CONFIG_USB)
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
 void omap1_usb_init(struct omap_usb_config *pdata);
 #else
 static inline void omap1_usb_init(struct omap_usb_config *pdata)
-- 
2.20.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel