Subject: Re: [PATCH 5/6] arm64: tegra: Enable GPIO controllers nodes for P2972-0000 platform

From: Thierry Reding <[email-masked]>
Date: Fri, 22 Nov 2019 14:20:07 +0100

On Fri, Nov 22, 2019 at 04:15:04PM +0530, Vidya Sagar wrote:
> Enable GPIO controllers nodes for P2972-0000 platform which are required
> by other controllers in the SoC for example when PCIe C5 controller
> operates in endpoint mode.
> 
> Signed-off-by: Vidya Sagar <[email-masked]>
> ---
>  arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 8 ++++++++
>  1 file changed, 8 insertions(+)

The GPIO controllers are enabled by default, so there's no need to
explicitly enable them.

Thierry

> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> index 353a6a22196d..7eb64b816e08 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
> @@ -37,6 +37,14 @@
>  			status = "okay";
>  		};
>  
> +		gpio@2200000 {
> +			status = "okay";
> +		};
> +
> +		gpio@c2f0000 {
> +			status = "okay";
> +		};
> +
>  		pwm@c340000 {
>  			status = "okay";
>  		};
> -- 
> 2.17.1
> 
_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel