Subject: Re: [PATCH] ARM: dts: e60k02: fix power button

From: Shawn Guo <[email-masked]>
Date: Mon, 9 Dec 2019 08:56:26 +0800

On Thu, Dec 05, 2019 at 07:06:12AM +0100, Andreas Kemnade wrote:
> On Wed, 4 Dec 2019 20:36:47 +0800
> Shawn Guo <[email-masked]> wrote:
> 
> > On Mon, Nov 11, 2019 at 09:29:59PM +0100, Andreas Kemnade wrote:
> > > The power button was only producing irqs, but no key events,
> > > Forced power down with long key press works, so probably
> > > only a short spike arrives at the SoC.
> > > Further investigation shows that LDORTC2 is off after boot
> > > of the vendor kernel. LDORTC2 is shared with a GPIO at the pmic
> > > which probably transfers the button press to the SoC.
> > > That regulator off at boot, so "regulator-boot-on" is definitively
> > > wrong. So remove that.
> > > 
> > > Reported-by: H. Nikolaus Schaller <[email-masked]>
> > > Signed-off-by: Andreas Kemnade <[email-masked]>  
> > 
> > Do you want this go into 5.5-rc as a fix?  In that case, we may need a
> > Fixes tag here.
> > 
> well, now there is 
> regulator: core: Let boot-on regulators be powered off
> so the power button should work after regulator_late_cleanup()
> is called but that is usually some time after userspace has started,
> so it would be better to have that in. And of course dt should
> correctly describe the hardware. That would be
> 
> Fixes: c100ea86e6ab ("ARM: dts: add Netronix E60K02 board common file")

Applied with the tag.

> 
> BTW: I have not seen your 5.5 stuff in Linus' tree yet. Seems that Olof
> has not sent his pull request yet or is there bigger trouble?

Now they are in v5.5-rc1.

Shawn

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel