Subject: Re: [PATCH 3/3] arm64: dts: imx8mn-evk: enable usb1 and typec support

From: Shawn Guo <[email-masked]>
Date: Wed, 11 Dec 2019 11:50:38 +0800

On Thu, Dec 05, 2019 at 08:06:28AM +0000, Jun Li wrote:
> From: Li Jun <[email-masked]>
> 
> USB1 port has typec connector with power delivery support:
> - Dual data role: host and device.
> - Dual power role: source and sink, prefer power sink.
> 
> Signed-off-by: Li Jun <[email-masked]>
> ---
>  arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 65 +++++++++++++++++++++++++++
>  1 file changed, 65 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
> index 2a74330..61511e9 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
> @@ -3,6 +3,7 @@
>   * Copyright 2019 NXP
>   */
>  
> +#include <dt-bindings/usb/pd.h>
>  #include "imx8mn.dtsi"
>  
>  / {
> @@ -60,6 +61,42 @@
>  	status = "okay";
>  };
>  
> +&i2c2 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	ptn5110: tcpc@50 {
> +		compatible = "nxp,ptn5110";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_typec1>;
> +		reg = <0x50>;
> +		interrupt-parent = <&gpio2>;
> +		interrupts = <11 8>;

We prefer to use macro for IRQ type:

s/8/IRQ_TYPE_LEVEL_LOW

I fixed it up and applied all 3 patches.

Shawn

> +		status = "okay";
> +
> +		port {
> +			typec1_dr_sw: endpoint {
> +				remote-endpoint = <&usb1_drd_sw>;
> +			};
> +		};
> +
> +		typec1_con: connector {
> +			compatible = "usb-c-connector";
> +			label = "USB-C";
> +			power-role = "dual";
> +			data-role = "dual";
> +			try-power-role = "sink";
> +			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
> +			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
> +				     PDO_VAR(5000, 20000, 3000)>;
> +			op-sink-microwatt = <15000000>;
> +			self-powered;
> +		};
> +	};
> +};
> +
>  &snvs_pwrkey {
>  	status = "okay";
>  };
> @@ -70,6 +107,21 @@
>  	status = "okay";
>  };
>  
> +&usbotg1 {
> +	dr_mode = "otg";
> +	hnp-disable;
> +	srp-disable;
> +	adp-disable;
> +	usb-role-switch;
> +	status = "okay";
> +
> +	port {
> +		usb1_drd_sw: endpoint {
> +			remote-endpoint = <&typec1_dr_sw>;
> +		};
> +	};
> +};
> +
>  &usdhc2 {
>  	assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
>  	assigned-clock-rates = <200000000>;
> @@ -138,12 +190,25 @@
>  		>;
>  	};
>  
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
> +			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
> +		>;
> +	};
> +
>  	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
>  		fsl,pins = <
>  			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
>  		>;
>  	};
>  
> +	pinctrl_typec1: typec1grp {
> +		fsl,pins = <
> +			MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
> +		>;
> +	};
> +
>  	pinctrl_uart2: uart2grp {
>  		fsl,pins = <
>  			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
> -- 
> 2.7.4
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel