Subject: [PATCHv1 0/3] Enable crypto module on Amlogic GXBB SoC platform

From: Anand Moon <[email-masked]>
Date: Wed, 11 Dec 2019 08:41:09 +0000

Below changes enable cryto module on Amlogic GXBB SoC.

I was realy happy to get this feature working on Odroid C2 SBC.
I will try on other SBC in the future.

Tested with loading tcrypt module.
# sudo modprobe tcrypt sec=1 mode=200
[sudo] password for alarm:
[  903.867059] tcrypt:
[  903.867059] testing speed of async ecb(aes) (ecb(aes-arm64)) encryption
[  903.870265] tcrypt: test 0 (128 bit key, 16 byte blocks): 1922107 operations in 1 seconds (30753712 bytes)
[  904.872802] tcrypt: test 1 (128 bit key, 64 byte blocks): 679032 operations in 1 seconds (43458048 bytes)
[  905.872717] tcrypt: test 2 (128 bit key, 256 byte blocks): 190190 operations in 1 seconds (48688640 bytes)
[  906.872793] tcrypt: test 3 (128 bit key, 1024 byte blocks): 49014 operations in 1 seconds (50190336 bytes)
[  907.872808] tcrypt: test 4 (128 bit key, 1472 byte blocks): 34342 operations in 1 seconds (50551424 bytes)
[  908.876828] tcrypt: test 5 (128 bit key, 8192 byte blocks): 6199 operations in 1 seconds (50782208 bytes)

-Anand

Anand Moon (3):
  arm64: dts: amlogic: adds crypto hardware node for GXBB SoCs
  dt-bindings: crypto: Add compatible string for amlogic GXBB SoC
  crypto: amlogic: Add new compatible string for amlogic GXBB SoC

 .../devicetree/bindings/crypto/amlogic,gxl-crypto.yaml |  1 +
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi            | 10 ++++++++++
 drivers/crypto/amlogic/amlogic-gxl-core.c              |  1 +
 3 files changed, 12 insertions(+)

-- 
2.24.0

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel