Subject: [PATCH v2 1/3] clocksource: davinci: only enable tim34 in periodic mode once it's initialized

From: Bartosz Golaszewski <[email-masked]>
Date: Tue, 24 Dec 2019 11:03:26 +0100

From: Bartosz Golaszewski <[email-masked]>

The DM365 platform has a strange quirk (only present when using ancient
u-boot - mainline u-boot v2013.01 and later works fine) where if we
enable the second half of the timer in periodic mode before we do its
initialization - the time won't start flowing and we can't boot.

When using more recent u-boot, we can enable the timer, then reinitialize
it and all works fine.

I've been unable to figure out why that is, but a workaround for this
is straightforward - don't enable the tim34 timer in periodic mode until
it's properly initialized.

Signed-off-by: Bartosz Golaszewski <[email-masked]>
---
 drivers/clocksource/timer-davinci.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/clocksource/timer-davinci.c b/drivers/clocksource/timer-davinci.c
index 62745c962049..2801f21bb0e2 100644
--- a/drivers/clocksource/timer-davinci.c
+++ b/drivers/clocksource/timer-davinci.c
@@ -62,6 +62,7 @@ static struct {
 	struct clocksource dev;
 	void __iomem *base;
 	unsigned int tim_off;
+	bool initialized;
 } davinci_clocksource;
 
 static struct davinci_clockevent *
@@ -94,8 +95,9 @@ static void davinci_tim12_shutdown(void __iomem *base)
 	 * halves. In this case TIM34 runs in periodic mode and we must
 	 * not modify it.
 	 */
-	tcr |= DAVINCI_TIMER_ENAMODE_PERIODIC <<
-		DAVINCI_TIMER_ENAMODE_SHIFT_TIM34;
+	if (likely(davinci_clocksource.initialized))
+		tcr |= DAVINCI_TIMER_ENAMODE_PERIODIC <<
+		       DAVINCI_TIMER_ENAMODE_SHIFT_TIM34;
 
 	writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR);
 }
@@ -107,8 +109,9 @@ static void davinci_tim12_set_oneshot(void __iomem *base)
 	tcr = DAVINCI_TIMER_ENAMODE_ONESHOT <<
 		DAVINCI_TIMER_ENAMODE_SHIFT_TIM12;
 	/* Same as above. */
-	tcr |= DAVINCI_TIMER_ENAMODE_PERIODIC <<
-		DAVINCI_TIMER_ENAMODE_SHIFT_TIM34;
+	if (likely(davinci_clocksource.initialized))
+		tcr |= DAVINCI_TIMER_ENAMODE_PERIODIC <<
+		       DAVINCI_TIMER_ENAMODE_SHIFT_TIM34;
 
 	writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR);
 }
@@ -206,6 +209,8 @@ static void davinci_clocksource_init_tim34(void __iomem *base)
 	writel_relaxed(0x0, base + DAVINCI_TIMER_REG_TIM34);
 	writel_relaxed(UINT_MAX, base + DAVINCI_TIMER_REG_PRD34);
 	writel_relaxed(tcr, base + DAVINCI_TIMER_REG_TCR);
+
+	davinci_clocksource.initialized = true;
 }
 
 /*
-- 
2.23.0

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel