Subject: [PATCH] arm64: dts: imx8qxp-mek: Remove unexisting Ethernet PHY

From: Fabio Estevam <[email-masked]>
Date: Mon, 17 Feb 2020 16:15:03 -0300

There is only on Ethernet port and one Ethernet PHY on imx8qxp-mek.

Remove the unexisting ethphy1 port.

This fixes a run-time warning:

mdio_bus 5b040000.ethernet-1: MDIO device at address 1 is missing.

Fixes: fdea904e85e1 ("arm64: dts: imx: add imx8qxp mek support")
Signed-off-by: Fabio Estevam <[email-masked]>
---
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index d3d26cca7d52..13460a360c6a 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -52,11 +52,6 @@
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 		};
-
-		ethphy1: ethernet-phy@1 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			reg = <1>;
-		};
 	};
 };
 
-- 
2.17.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel