Subject: Re: [PATCH v6 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub

From: Rob Herring <[email-masked]>
Date: Mon, 2 Mar 2020 17:47:44 -0600

On Thu, Feb 27, 2020 at 06:07:57PM -0800, [email-masked] wrote:
> From: Tao Ren <[email-masked]>
> 
> Add device tree binding documentation for the Aspeed USB 2.0 Virtual HUb
> Controller.
> 
> Signed-off-by: Tao Ren <[email-masked]>
> Reviewed-by: Joel Stanley <[email-masked]>
> ---
>  Changes in v6:
>    - added 2 required properties into example and passed "make
>      dt_binding_check".
>  Changes in v5:
>    - updated maintainer to Ben.
>    - refined patch description per Joel's suggestion.
>  No change in v2/v3/v4:
>    - the patch is added to the patch series since v4.
> 
>  .../bindings/usb/aspeed,usb-vhub.yaml         | 73 +++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
> 
> diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
> new file mode 100644
> index 000000000000..b9f33310e9a2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later

Dual license new bindings please.

(GPL-2.0-only OR BSD-2-Clause)

> +# Copyright (c) 2020 Facebook Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/aspeed,usb-vhub.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED USB 2.0 Virtual Hub Controller
> +
> +maintainers:
> +  - Benjamin Herrenschmidt <[email-masked]>
> +
> +description: |+
> +  The ASPEED USB 2.0 Virtual Hub Controller implements 1 set of USB Hub
> +  register and several sets of Device and Endpoint registers to support
> +  the Virtual Hub's downstream USB devices.
> +
> +  Supported number of devices and endpoints vary depending on hardware
> +  revisions. AST2400 and AST2500 Virtual Hub supports 5 downstream devices
> +  and 15 generic endpoints, while AST2600 Virtual Hub supports 7 downstream
> +  devices and 21 generic endpoints.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2400-usb-vhub
> +      - aspeed,ast2500-usb-vhub
> +      - aspeed,ast2600-usb-vhub
> +
> +  reg:
> +    maxItems: 1
> +    description: Common configuration registers

If 'Common' means something specific to this block, then keep. 
Otherwise, you can drop ti.

> +
> +  clocks:
> +    maxItems: 1
> +    description: The Virtual Hub Controller clock gate

Drop this.

> +
> +  interrupts:
> +    maxItems: 1
> +
> +  aspeed,vhub-downstream-ports:
> +    description: Number of downstream ports supported by the Virtual Hub
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32

Constraints?

'maximum: 5' ?

default?

> +
> +  aspeed,vhub-generic-endpoints:
> +    description: Number of generic endpoints supported by the Virtual Hub
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32

Constraints?

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - interrupts
> +  - aspeed,vhub-downstream-ports
> +  - aspeed,vhub-generic-endpoints
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/aspeed-clock.h>
> +    vhub: usb-vhub@1e6a0000 {
> +            compatible = "aspeed,ast2500-usb-vhub";
> +            reg = <0x1e6a0000 0x300>;
> +            interrupts = <5>;
> +            clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> +            aspeed,vhub-downstream-ports = <5>;
> +            aspeed,vhub-generic-endpoints = <15>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&pinctrl_usb2ad_default>;
> +    };
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel