Subject: Re: [PATCH 3/3] bus: ti-sysc: Implement display subsystem reset quirk

From: Tony Lindgren <[email-masked]>
Date: Tue, 3 Mar 2020 07:49:53 -0800

* Tony Lindgren <[email-masked]> [200303 15:14]:
> * Tomi Valkeinen <[email-masked]> [200303 06:03]:
> > On 24/02/2020 21:12, Tony Lindgren wrote:
> > > +	if (sysc_soc->soc == SOC_3430) {
> > > +		/* Clear DSS_SDI_CONTROL */
> > > +		sysc_write(ddata, dispc_offset + 0x44, 0);
> > > +
> > > +		/* Clear DSS_PLL_CONTROL */
> > > +		sysc_write(ddata, dispc_offset + 0x48, 0);
> > 
> > These are not dispc registers, but dss registers.
> 
> Ouch. Thanks for catching this, will include in the fix.
> 
> > > +	}
> > > +
> > > +	/* Clear DSS_CONTROL to switch DSS clock sources to PRCM if not */
> > > +	sysc_write(ddata, dispc_offset + 0x40, 0);
> > 
> > Same here.

Below is a fix using dispc offset for dss registers.

Regards,

Tony

8< ----------------------
>From tony Mon Sep 17 00:00:00 2001
From: Tony Lindgren <[email-masked]>
Date: Tue, 3 Mar 2020 07:17:43 -0800
Subject: [PATCH] bus: ti-sysc: Fix wrong offset for display subsystem
 reset quirk

Commit 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset
quirk") added support for DSS reset, but is using dispc offset also for
DSS also registers as reported by Tomi Valkeinen <[email-masked]>.
Also, we're not using dispc_offset for dispc IRQSTATUS register so let's
fix that too.

Fixes: 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset quirk")
Reported-by: Tomi Valkeinen <[email-masked]>
Signed-off-by: Tony Lindgren <[email-masked]>
---
 drivers/bus/ti-sysc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1566,7 +1566,7 @@ static void sysc_pre_reset_quirk_dss(struct sysc *ddata)
 		return;
 
 	/* Clear IRQSTATUS */
-	sysc_write(ddata, 0x1000 + 0x18, irq_mask);
+	sysc_write(ddata, dispc_offset + 0x18, irq_mask);
 
 	/* Disable outputs */
 	val = sysc_quirk_dispc(ddata, dispc_offset, true);
@@ -1580,14 +1580,14 @@ static void sysc_pre_reset_quirk_dss(struct sysc *ddata)
 
 	if (sysc_soc->soc == SOC_3430) {
 		/* Clear DSS_SDI_CONTROL */
-		sysc_write(ddata, dispc_offset + 0x44, 0);
+		sysc_write(ddata, 0x44, 0);
 
 		/* Clear DSS_PLL_CONTROL */
-		sysc_write(ddata, dispc_offset + 0x48, 0);
+		sysc_write(ddata, 0x48, 0);
 	}
 
 	/* Clear DSS_CONTROL to switch DSS clock sources to PRCM if not */
-	sysc_write(ddata, dispc_offset + 0x40, 0);
+	sysc_write(ddata, 0x40, 0);
 }
 
 /* 1-wire needs module's internal clocks enabled for reset */
-- 
2.25.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel