From: Chen-Yu Tsai <wens@kernel•org>
To: Maxime Ripard <mripard@kernel•org>
Cc: devicetree@vger•kernel.org, Chen-Yu Tsai <wens@csie•org>,
linux-kernel@vger•kernel.org,
linux-arm-kernel@lists•infradead.org
Subject: [PATCH 3/3] ARM: dts: sun8i: r40: Move SPI device nodes based on address order
Date: Wed, 11 Mar 2020 01:47:09 +0800 [thread overview]
Message-ID: <20200310174709.24174-4-wens@kernel.org> (raw)
In-Reply-To: <20200310174709.24174-1-wens@kernel.org>
From: Chen-Yu Tsai <wens@csie•org>
When the SPI device nodes were added, they were added in the wrong
location in the device tree file. The device nodes should be sorted
by register address.
Move the devices node to their correct positions within the file.
Fixes: 554581b79139 ("ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes")
Signed-off-by: Chen-Yu Tsai <wens@csie•org>
---
arch/arm/boot/dts/sun8i-r40.dtsi | 104 +++++++++++++++----------------
1 file changed, 52 insertions(+), 52 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 81cc92ddc78b..f0ede4f52aa3 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -198,6 +198,32 @@ nmi_intc: interrupt-controller@1c00030 {
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
+ spi0: spi@1c05000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c05000 0x1000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@1c06000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c06000 0x1000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
csi0: csi@1c09000 {
compatible = "allwinner,sun8i-r40-csi0",
"allwinner,sun7i-a20-csi0";
@@ -307,6 +333,19 @@ crypto: crypto@1c15000 {
resets = <&ccu RST_BUS_CE>;
};
+ spi2: spi@1c17000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c17000 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
ahci: sata@1c18000 {
compatible = "allwinner,sun8i-r40-ahci";
reg = <0x01c18000 0x1000>;
@@ -364,6 +403,19 @@ ohci2: usb@1c1c400 {
status = "disabled";
};
+ spi3: spi@1c1f000 {
+ compatible = "allwinner,sun8i-r40-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c1f000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-r40-ccu";
reg = <0x01c20000 0x400>;
@@ -692,58 +744,6 @@ i2c4: i2c@1c2c000 {
#size-cells = <0>;
};
- spi0: spi@1c05000 {
- compatible = "allwinner,sun8i-r40-spi",
- "allwinner,sun8i-h3-spi";
- reg = <0x01c05000 0x1000>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
- clock-names = "ahb", "mod";
- resets = <&ccu RST_BUS_SPI0>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi1: spi@1c06000 {
- compatible = "allwinner,sun8i-r40-spi",
- "allwinner,sun8i-h3-spi";
- reg = <0x01c06000 0x1000>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
- clock-names = "ahb", "mod";
- resets = <&ccu RST_BUS_SPI1>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi2: spi@1c17000 {
- compatible = "allwinner,sun8i-r40-spi",
- "allwinner,sun8i-h3-spi";
- reg = <0x01c17000 0x1000>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
- clock-names = "ahb", "mod";
- resets = <&ccu RST_BUS_SPI2>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi3: spi@1c1f000 {
- compatible = "allwinner,sun8i-r40-spi",
- "allwinner,sun8i-h3-spi";
- reg = <0x01c1f000 0x1000>;
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
- clock-names = "ahb", "mod";
- resets = <&ccu RST_BUS_SPI3>;
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
gmac: ethernet@1c50000 {
compatible = "allwinner,sun8i-r40-gmac";
syscon = <&ccu>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-03-10 17:47 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-10 17:47 [PATCH 0/3] ARM: dts: sun8i: r40: fix SPI address and reorder nodes Chen-Yu Tsai
2020-03-10 17:47 ` [PATCH 1/3] ARM: dts: sun8i: r40: Move AHCI device node based on address order Chen-Yu Tsai
2020-03-11 10:59 ` Andre Przywara
2020-03-11 14:46 ` Chen-Yu Tsai
2020-03-10 17:47 ` [PATCH 2/3] ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3 Chen-Yu Tsai
2020-03-11 11:22 ` Andre Przywara
2020-03-10 17:47 ` Chen-Yu Tsai [this message]
2020-03-11 11:22 ` [PATCH 3/3] ARM: dts: sun8i: r40: Move SPI device nodes based on address order Andre Przywara
2020-03-10 18:10 ` [PATCH 0/3] ARM: dts: sun8i: r40: fix SPI address and reorder nodes Maxime Ripard
2020-03-12 3:26 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200310174709.24174-4-wens@kernel.org \
--to=wens@kernel$(echo .)org \
--cc=devicetree@vger$(echo .)kernel.org \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
--cc=linux-kernel@vger$(echo .)kernel.org \
--cc=mripard@kernel$(echo .)org \
--cc=wens@csie$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox