Subject: [RFC PATCH 2/4] pwm: sun4i: Disable pwm before turning off clock gate

From: Pascal Roeleven <[email-masked]>
Date: Tue, 17 Mar 2020 16:59:04 +0100

The clock gate must stay on when disabling to ensure proper turning off.
After one period it will still be disabled anyway.

Signed-off-by: Pascal Roeleven <[email-masked]>
---
 drivers/pwm/pwm-sun4i.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index 5c677c563..56942036b 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -292,13 +292,12 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	else
 		ctrl |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
 
-	ctrl |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-
 	if (state->enabled) {
 		ctrl |= BIT_CH(PWM_EN, pwm->hwpwm);
+		ctrl |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
 	} else {
+		/* Turn gate off after delay to ensure proper turning off */
 		ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm);
-		ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
 	}
 
 	sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
-- 
2.20.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel