Subject: Re: [PATCH v3 1/4] dt-bindings: display: mediatek: add property to control mipi tx drive current

From: Rob Herring <[email-masked]>
Date: Mon, 23 Mar 2020 16:00:33 -0600

On Wed, Mar 11, 2020 at 03:40:29PM +0800, Jitao Shi wrote:
> Add a property to control mipi tx drive current:
> "drive-strength-microamp"
> 
> Signed-off-by: Jitao Shi <[email-masked]>
> ---
>  .../devicetree/bindings/display/mediatek/mediatek,dsi.txt     | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> index a19a6cc375ed..d501f9ff4b1f 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -33,6 +33,9 @@ Required properties:
>  - #clock-cells: must be <0>;
>  - #phy-cells: must be <0>.
>  
> +Optional properties:
> +- drive-strength-microamp: adjust driving current, should be 1 ~ 0xF

TBC, 1-0xf is in units of microamps? So a max drive strength of 15uA? 
Seems a bit low.

> +
>  Example:
>  
>  mipi_tx0: mipi-dphy@10215000 {
> @@ -42,6 +45,7 @@ mipi_tx0: mipi-dphy@10215000 {
>  	clock-output-names = "mipi_tx0_pll";
>  	#clock-cells = <0>;
>  	#phy-cells = <0>;
> +	drive-strength-microamp = <0x8>;
>  };
>  
>  dsi0: dsi@1401b000 {
> -- 
> 2.21.0

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel