Subject: Re: [PATCH 1/8] dt-bindings: interconnect: Add bindings for imx8m noc

From: Rob Herring <[email-masked]>
Date: Mon, 30 Mar 2020 09:39:12 -0600

On Thu, 26 Mar 2020 04:16:13 +0200, Leonard Crestez wrote:
> Add initial dt bindings for the interconnects inside i.MX chips.
> Multiple external IPs are involved but SOC integration means the
> software controllable interfaces are very similar.
> 
> Main NOC node acts as interconnect provider if #interconnect-cells is
> present. Currently there is a single imx interconnect provider for the
> whole SOC.
> 
> Other pieces of scalable interconnects can be present, each with their
> own OPP table.
> 
> Signed-off-by: Leonard Crestez <[email-masked]>
> ---
>  .../bindings/interconnect/fsl,imx8m-noc.yaml  | 138 ++++++++++++++++++
>  1 file changed, 138 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml:  while parsing a block mapping
  in "<unicode string>", line 4, column 1
did not find expected key
  in "<unicode string>", line 79, column 9
Documentation/devicetree/bindings/Makefile:12: recipe for target 'Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
Makefile:1262: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2

See https://patchwork.ozlabs.org/patch/1261720

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel