Subject: Re: [PATCHv2 2/2] dt-bindings: net: dwmac: Convert stm32 dwmac to DT schema

From: Rob Herring <[email-masked]>
Date: Mon, 30 Mar 2020 16:17:30 -0600

On Tue, Mar 17, 2020 at 04:17:06PM +0100, Christophe Roullier wrote:
> Convert stm32 dwmac to DT schema.
> 
> Signed-off-by: Christophe Roullier <[email-masked]>
> ---
>  .../devicetree/bindings/net/stm32-dwmac.txt   |  44 -----
>  .../devicetree/bindings/net/stm32-dwmac.yaml  | 160 ++++++++++++++++++
>  2 files changed, 160 insertions(+), 44 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
>  create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.txt b/Documentation/devicetree/bindings/net/stm32-dwmac.txt
> deleted file mode 100644
> index a90eef11dc46..000000000000
> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.txt
> +++ /dev/null
> @@ -1,44 +0,0 @@
> -STMicroelectronics STM32 / MCU DWMAC glue layer controller
> -
> -This file documents platform glue layer for stmmac.
> -Please see stmmac.txt for the other unchanged properties.
> -
> -The device node has following properties.
> -
> -Required properties:
> -- compatible:  For MCU family should be "st,stm32-dwmac" to select glue, and
> -	       "snps,dwmac-3.50a" to select IP version.
> -	       For MPU family should be "st,stm32mp1-dwmac" to select
> -	       glue, and "snps,dwmac-4.20a" to select IP version.
> -- clocks: Must contain a phandle for each entry in clock-names.
> -- clock-names: Should be "stmmaceth" for the host clock.
> -	       Should be "mac-clk-tx" for the MAC TX clock.
> -	       Should be "mac-clk-rx" for the MAC RX clock.
> -	       For MPU family need to add also "ethstp" for power mode clock
> -- interrupt-names: Should contain a list of interrupt names corresponding to
> -           the interrupts in the interrupts property, if available.
> -		   Should be "macirq" for the main MAC IRQ
> -		   Should be "eth_wake_irq" for the IT which wake up system
> -- st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
> -	       encompases the glue register, and the offset of the control register.
> -
> -Optional properties:
> -- clock-names:     For MPU family "eth-ck" for PHY without quartz
> -- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
> -- st,eth-ref-clk-sel (boolean) :  set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK.
> -
> -Example:
> -
> -	ethernet@40028000 {
> -		compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
> -		reg = <0x40028000 0x8000>;
> -		reg-names = "stmmaceth";
> -		interrupts = <0 61 0>, <0 62 0>;
> -		interrupt-names = "macirq", "eth_wake_irq";
> -		clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
> -		clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
> -		st,syscon = <&syscfg 0x4>;
> -		snps,pbl = <8>;
> -		snps,mixed-burst;
> -		dma-ranges;
> -	};
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> new file mode 100644
> index 000000000000..4440216917b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> @@ -0,0 +1,160 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2019 BayLibre, SAS
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: STMicroelectronics STM32 / MCU DWMAC glue layer controller
> +
> +maintainers:
> +  - Alexandre Torgue <[email-masked]>
> +  - Christophe Roullier <[email-masked]>
> +
> +description:
> +  This file documents platform glue layer for stmmac.
> +
> +# We need a select here so we don't match all nodes with 'snps,dwmac'
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - st,stm32-dwmac
> +          - st,stm32mp1-dwmac
> +  required:
> +    - compatible
> +
> +allOf:
> +  - $ref: "snps,dwmac.yaml#"
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - st,stm32-dwmac
> +              - st,stm32mp1-dwmac

This schema is only applied when these compatibles are present, so you 
don't need the 'if' and all this can move to the main section.

> +    then:
> +      properties:
> +       clocks:
> +         minItems: 3
> +         maxItems: 5
> +         items:
> +          - description: GMAC main clock
> +          - description: MAC TX clock
> +          - description: MAC RX clock
> +          - description: For MPU family, used for power mode
> +          - description: For MPU family, used for PHY without quartz
> +
> +       clock-names:
> +         minItems: 3
> +         maxItems: 5
> +         contains:
> +          enum:
> +            - stmmaceth
> +            - mac-clk-tx
> +            - mac-clk-rx
> +            - ethstp
> +            - eth-ck
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - st,stm32mp1-dwmac
> +          - const: snps,dwmac-4.20a
> +      - items:
> +          - enum:
> +              - st,stm32-dwmac
> +          - const: snps,dwmac-4.10a
> +      - items:
> +          - enum:
> +              - st,stm32-dwmac
> +          - const: snps,dwmac-3.50a
> +
> +  st,syscon:
> +    allOf:
> +      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> +    description:
> +      Should be phandle/offset pair. The phandle to the syscon node which
> +      encompases the glue register, and the offset of the control register
> +
> +  st,eth-clk-sel:
> +    description:
> +      set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
> +    type: boolean
> +
> +  st,eth-ref-clk-sel:
> +    description:
> +      set this property in RMII mode when you have PHY without crystal 50MHz and want to
> +      select RCC clock instead of ETH_REF_CLK.
> +    type: boolean
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - st,syscon
> +
> +examples:
> + - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/stm32mp1-clks.h>
> +    #include <dt-bindings/reset/stm32mp1-resets.h>
> +    #include <dt-bindings/mfd/stm32h7-rcc.h>
> +    //Example 1
> +     ethernet0: ethernet@5800a000 {
> +       compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
> +       reg = <0x5800a000 0x2000>;
> +       reg-names = "stmmaceth";
> +       interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> +       interrupt-names = "macirq";
> +       clock-names = "stmmaceth",
> +                     "mac-clk-tx",
> +                     "mac-clk-rx",
> +                     "ethstp",
> +                     "eth-ck";
> +       clocks = <&rcc ETHMAC>,
> +                <&rcc ETHTX>,
> +                <&rcc ETHRX>,
> +                <&rcc ETHSTP>,
> +                <&rcc ETHCK_K>;
> +       st,syscon = <&syscfg 0x4>;
> +       snps,pbl = <2>;
> +       snps,axi-config = <&stmmac_axi_config_0>;
> +       snps,tso;
> +       status = "disabled";

Don't show status in examples.

> +       phy-mode = "rgmii";
> +       };

Wrong indentation.

> +
> +    //Example 2 (MCU example)
> +     ethernet1: ethernet@40028000 {
> +       compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
> +       reg = <0x40028000 0x8000>;
> +       reg-names = "stmmaceth";
> +       interrupts = <0 61 0>, <0 62 0>;
> +       interrupt-names = "macirq", "eth_wake_irq";
> +       clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
> +       clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
> +       st,syscon = <&syscfg 0x4>;
> +       snps,pbl = <8>;
> +       snps,mixed-burst;
> +       dma-ranges;
> +       phy-mode = "mii";
> +       };
> +
> +    //Example 3
> +     ethernet2: ethernet@40027000 {
> +       compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
> +       reg = <0x40028000 0x8000>;
> +       reg-names = "stmmaceth";
> +       interrupts = <61>;
> +       interrupt-names = "macirq";
> +       clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
> +       clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>;
> +       st,syscon = <&syscfg 0x4>;
> +       snps,pbl = <8>;
> +       status = "disabled";
> +       phy-mode = "mii";
> +       };
> -- 
> 2.17.1
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel