Subject: Re: [PATCH v4 2/5] ARM: dts: add Protonic PRTI6Q board

From: Rob Herring <[email-masked]>
Date: Fri, 10 Apr 2020 12:18:52 -0500

On Mon, Mar 30, 2020 at 02:06:37PM +0200, Oleksij Rempel wrote:
> Protonic PRTI6Q is a development board and a base class for different
> specific customer application boards based on the i.MX6 family of SoCs,
> developed by Protonic Holland.
> 
> Signed-off-by: David Jander <[email-masked]>
> Signed-off-by: Oleksij Rempel <[email-masked]>
> ---
>  .../devicetree/bindings/arm/fsl.yaml          |   1 +
>  arch/arm/boot/dts/Makefile                    |   1 +
>  arch/arm/boot/dts/imx6q-prti6q.dts            | 551 ++++++++++++++++++
>  arch/arm/boot/dts/imx6qdl-prti6q.dtsi         | 185 ++++++
>  4 files changed, 738 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6q-prti6q.dts
>  create mode 100644 arch/arm/boot/dts/imx6qdl-prti6q.dtsi
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index a8e0b4a813ed..3b52b582efdf 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -119,6 +119,7 @@ properties:
>                - fsl,imx6q-sabreauto
>                - fsl,imx6q-sabrelite
>                - fsl,imx6q-sabresd
> +              - prt,prti6q                      # Protonic PRTI6Q board
>                - technologic,imx6q-ts4900
>                - technologic,imx6q-ts7970
>                - toradex,apalis_imx6q            # Apalis iMX6 Module
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d6546d2676b9..3f500a9e88a9 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -530,6 +530,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
>  	imx6q-phytec-mira-rdk-nand.dtb \
>  	imx6q-phytec-pbab01.dtb \
>  	imx6q-pistachio.dtb \
> +	imx6q-prti6q.dtb \
>  	imx6q-rex-pro.dtb \
>  	imx6q-sabreauto.dtb \
>  	imx6q-sabrelite.dtb \
> diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts
> new file mode 100644
> index 000000000000..46a455e20fa3
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-prti6q.dts
> @@ -0,0 +1,551 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) 2014 Protonic Holland
> + */
> +
> +/dts-v1/;
> +#include "imx6q.dtsi"
> +#include "imx6qdl-prti6q.dtsi"
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/sound/fsl-imx-audmux.h>
> +
> +/ {
> +	model = "Protonic PRTI6Q board";
> +	compatible = "prt,prti6q", "fsl,imx6q";
> +
> +	memory@10000000 {
> +		device_type = "memory";
> +		reg = <0x10000000 0xf0000000>;
> +	};
> +
> +	backlight_lcd: backlight-lcd {
> +		compatible = "pwm-backlight";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_backlight>;
> +		pwms = <&pwm1 0 5000000>;
> +		brightness-levels = <0 16 64 255>;
> +		num-interpolated-steps = <16>;
> +		default-brightness-level = <16>;
> +		power-supply = <&reg_3v3>;
> +		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
> +		status = "okay";

Don't need status.

Otherwise,

Reviewed-by: Rob Herring <[email-masked]>

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel