Subject: Re: [PATCH v3 01/13] mfd: Add i.MX generic mix support

From: Lee Jones <[email-masked]>
Date: Fri, 17 Apr 2020 09:07:47 +0100

On Wed, 15 Apr 2020, Abel Vesa wrote:

> Some of the i.MX SoCs have a IP for interfacing the dedicated IPs with
> clocks, resets and interrupts, plus some other specific control registers.
> To allow the functionality to be split between drivers, this MFD driver is
> added that has only two purposes: register the devices and map the entire
> register addresses. Everything else is left to the dedicated drivers that
> will bind to the registered devices.
> 
> Signed-off-by: Abel Vesa <[email-masked]>
> ---
>  drivers/mfd/Kconfig   | 11 +++++++++++
>  drivers/mfd/Makefile  |  1 +
>  drivers/mfd/imx-mix.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 60 insertions(+)
>  create mode 100644 drivers/mfd/imx-mix.c

For completeness - Arnd's reply to this patch:

  https://www.spinics.net/lists/linux-clk/msg47703.html

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel